2013-03-07 - Re: [GRASE-Hotspot] Running again (squid log issue)

Header Data

From: “Lozano, Hernán” <hl***o@cetsa.com.ar>
Message Hash: 3107bfd45237d4edaf12a72a3c7cda3aaefcd096f8880539a94a86a8d1b3c623
Message ID: <5919C439564D8D459BA8D5076AF6DD7C0CBCC419@PromiExchMBX01.prominente.com.ar>
Reply To: <51385784.5080709@radez.hr>
UTC Datetime: 2013-03-07 05:28:55 UTC
Raw Date: Thu, 07 Mar 2013 12:28:55 +0000

Raw message 

It seems as if they had erased the iptables, then gives access to your case without going through the squid service. You should start reviewing it. I hope I have been helpful.

Hernán Lozano



De: Drazen [dr***a@radez.hr]
Enviado el: jueves, 07 de marzo de 2013 06:01 a.m.
Para: GRASE Hotspot General Discussions
Asunto: Re: [GRASE-Hotspot] Running again (squid log issue)

Hi Paul,
I just did try to stop squid. It succeed. Then checked with my android
phone to connect. It went smothly. Internet access was allowed. At the
log page of adminstrator interface I could see connected android, but no
details recorded . What was correct assume.
Just intend to go further with testing, when one real client reported
problem with connection. It was W7 client. I checked personally at his
NB . Connection was alive, but has no acces to the internet.

So, I had to stop any further testing, because of him and also noticed
several iPhones online, all important roles in company, so I stopped
further testing. Squid started again, and everything went in order.

cat /proc/sys/net/ipv4/ip_forward

returned "1"

Sorry can't help you more at the moment.

Drazen


On 7.3.2013 9:32, Paul van Oijen wrote:
> Hai Drazen,
>
> I have no logging whatsoever from the hotspot anymore. Also the show all sessions will not show historic activities. It only show the amount of total data. (that's in the sql)
> On the older version I ran some stats tools using the access.log file from squid. It is in /var/log/squid3/access.log (which now stays empty)
> But it would be good to know if others also simply can turn of squid without any effect (I saw another post which sounds like the same issue).
> Maybe you could test it for me by simply entering 'service squid3 stop' on your hotspot and if any issue rise simply start it again with 'service squid3 start' on my site squid is simply not being used with Grase at the time (since 3.7.7.6)
> It's now just with IP forward. If I disable ipforward than the hotspot stops redirecting requests. You can test that with:
>
> cat /proc/sys/net/ipv4/ip_forward
> if it says 1 its being enabled if 0 its disabled I am sure it would say 1
>
> If you do:
>
> 'echo 0 > /proc/sys/net/ipv4/ip_forward' you would see after a few seconds the hotspot stops.
> Doing 'echo 1 > /proc/sys/net/ipv4/ip_forward' will enabled it again and the hotspot works again after a few seconds
>
> Pity as I liked squid in between (also for scanning and anti adds)
>
> Chrs
>
> -----------
>
> Hi Paul,
> Timothy wrote before about new way of session log displaying and filtering.
> Default view of session page is showing only active ones in new version.
> If no active conns.  at the moment , nothing is showed.
> There is a switch to all session view at the top-left  edge of session
> log frame. It says "Display All Sessions"
> Try that.
>
> Well, which log file is written actually? That part I don't know because
> ever need it yet.
>
> Rgds.
> Drazen
>
> -----Oorspronkelijk bericht-----
> Van: Paul van Oijen
> Verzonden: woensdag 6 maart 2013 10:21
> Aan: 'gr***t@lists.sourceforge.net'
> Onderwerp: RE: Running again (squid log issue)
>
> Hello,
>
> Just stopped squid3 (service squid3 stop) and to my amazement the hotspot is not even using Squid so all traffic goes directly. (ip forwarding ??) In the old version squid was still used and produced all stats.
>
> Is this indeed been disabled in this release or did something else happen?
>
> Chrs
>
> -----Oorspronkelijk bericht-----
> Van: Paul van Oijen
> Verzonden: dinsdag 5 maart 2013 16:42
> Aan: 'gr***t@lists.sourceforge.net'
> Onderwerp: Running again (squid log issue)
>
> Hello,
>
> Another issues rose.. the hotspot is now running ok but the access.log from squid stays empty.
> If I telnet to port 3128 from the local machine I see an entry but not from end users..
>
> What am I missing....?
>
> Chrs
>
> http://www.abnamrocomfin.com/maildisclaimer
>
>
> ------------------------------------------------------------------------------
> Symantec Endpoint Protection 12 positioned as A LEADER in The Forrester
> Wave(TM): Endpoint Security, Q1 2013 and "remains a good choice" in the
> endpoint security space. For insight on selecting the right partner to
> tackle endpoint security challenges, access the full report.
> http://p.sf.net/sfu/symantec-dev2dev
> _______________________________________________
> Grase-hotspot mailing list
> Gr***t@lists.sourceforge.net
> https://lists.sourceforge.net/lists/listinfo/grase-hotspot



------------------------------------------------------------------------------
Symantec Endpoint Protection 12 positioned as A LEADER in The Forrester
Wave(TM): Endpoint Security, Q1 2013 and "remains a good choice" in the
endpoint security space. For insight on selecting the right partner to
tackle endpoint security challenges, access the full report.
http://p.sf.net/sfu/symantec-dev2dev
_______________________________________________
Grase-hotspot mailing list
Gr***t@lists.sourceforge.net
https://lists.sourceforge.net/lists/listinfo/grase-hotspot

Thread