2013-09-03 - Re: [GRASE-Hotspot] Extending range

Header Data

From: Drazen <dr***a@radez.hr>
Message Hash: 3e3409ade2f8b4afdc0b17a876b54b427d6b390f19a2e4f12b30c9a0a52196e4
Message ID: <5225B71D.40909@radez.hr>
Reply To: <5225A242.2040102@ozaccess.com>
UTC Datetime: 2013-09-03 03:17:01 UTC
Raw Date: Tue, 03 Sep 2013 12:17:01 +0200

Raw message 

On 3.9.2013 10:48, rick wrote:
> Hi all,
>
> Can someone suggest the best way to extend the range of the Grase wifi
> network.
>
> Are repeaters or multiple access points via a switch the better option?
This is the normal option. You are limited to 100m ethernet cable 
between switch and each AP point.
You can also use better antennas on AP. This means antennas with 
directivity. Their diagram of Tx and Rx is nor circular then 
concentrated at narrow angle vertically and/or horizontally. Clients 
should be in eye of sight with AP antenna.
For longer distances, repeater is an option combined also with 
appropriate antennas. With repeater you will have drop of theoretical 
speed by50% in wife channel.
Better option then repeater is "link". You will need two devices acting 
as "link", and third device at far end connected with cable to second 
"link" device.
It is possible to use 5GHz devices for link , you will get more speed on 
link up to 200Mbs and get distances up to 30 km or more.
>
> If its multiple access points, is it as easy as plugging each access
> point into a switch and a cable from the switch to the 2nd network card
> in the Grase Server.?
It is perfectly same setting as when connecting directly to server.
> Same SSID on each access point, and separate each on a different channel?
Yes, exactly. Just keep in mind to choose at least 3 channel apart 
between two AP if they are close to each other. And of course check 
first already occupied channels and their signals strength in your 
neighborhood. Channels with foreign weak signals at your area of 
coverage  are possible useful if no empty one available.
> Turning off dhcp in each access ponit and turning off wds?
Yes, DHPC definitely should be off. WDS depends of what are you building 
up as well as about the device software. Some devices need WDS to act as 
repeater or link.
You should also assign static IP to each AP device how you can access 
them, to see what is going on, change setting if necessary or else. This 
way it is possible to access device on link segment and manage it. At 
link setup, network setting at each device need to be set as "bridge".

I set static IPs at six of my  AP devices currently in the air. I used 
lower part of range: 10.1.0.2 to 10.1.0.7 . It is not a problem for 
grase/chilli DHCP to keep those reserved because all APs are always "ON" 
theoretically. Better way is to limit Grase DHCP range out of these. 
Well I didn't yet.

I have one AP (Air life Outdoor with panel antenna 9dbi), one repater 
line consisting of AP with selfmade 18-elements LOG-periodic antena 
(15dbi) and AP with panel antenna 9dbi. Also I have one 5GHz Link 
consisting of two Ubiquity AirGrids with parabolic antennas (25dbi) and 
Linksys DD-WRT 54GL router at end. This is 500 meters far location.
Those LOG and Panel antennas are facing each other and they are 
aproximately 300meters away . It is interesting that both devices able 
to connect clients in own nearby because neither Tx/Rx diagram is not 
strictly directional. In nearby (say up to 30meters) of any directional 
antenna, there are always side and back RF fields which is strong enough 
for client's normal operation. This efect is used at the repeater end 
where clients are getting WiFi connection by those side emisions only 
while main antenna direction is adjusted to see far LOG antenna.


If you need more details I will be glad to help.

Regards
Drazen
>
> Thank you all...
>
> Rick
>
>
>
>
> ------------------------------------------------------------------------------
> Learn the latest--Visual Studio 2012, SharePoint 2013, SQL 2012, more!
> Discover the easy way to master current and previous Microsoft technologies
> and advance your career. Get an incredible 1,500+ hours of step-by-step
> tutorial videos with LearnDevNow. Subscribe today and save!
> http://pubads.g.doubleclick.net/gampad/clk?id=58040911&iu=/4140/ostg.clktrk
> _______________________________________________
> Grase-hotspot mailing list
> Gr***t@lists.sourceforge.net
> https://lists.sourceforge.net/lists/listinfo/grase-hotspot

Thread