2016-05-26 - Re: [GRASE-Hotspot] dhcp lease pool after default install

Header Data

From: Christopher Gregory <me***e@pc-networking-services.com>
Message Hash: c66c9337b8895e2653181028c4c5ca93365e0c4f83ad0727cc2896a75f4f2540
Message ID: <a6092e880d5afb01cd230c49ad4678c8.squirrel@www.pc-networking-services.com>
Reply To: <a452c6159d74c7302de5dfd6ff941729.squirrel@www.pc-networking-services.com>
UTC Datetime: 2016-05-26 05:47:35 UTC
Raw Date: Fri, 27 May 2016 00:47:35 +1200

Raw message 

Hello Tim,

Well after hours of poking around editing Grase specific files I found out
why the dhcpleases page displayed nothing.

In the file /usr/share/grase/src/Grase/Util.php you have added sudo to the
exec command to display the information.  On a default Debian installation
sudo is not installed so the information can never get displayed.  After I
installed sudo the page displays the information.

I was rather expecting it to display the lease start time and expiry time.

What modifications to the database tables and commands would be needed to
display this?

Regards,

Christopher.

On Thu, May 26, 2016 5:08 am, 'Christopher Gregory' via Grase Hotspot wrote:
> Hello Tim,
>
>
> I need the dhcp leases page working.  I have no idea what changes you
> have made to the original freeradius configs.  Having looked in the
> database there is NO table entries for dhcp pool or leases or any call to
> any file that it is in.
>
> The information seems to be sent to devnul.
>
>
> I need the exact file that this is in.  It is not working, and yet I have
>  to wade through the garbage that the other person posted.
>
> I guess if no one is willing to actually assist with this that I will
> have to look for another hotspot as having the information in syslog is
> USELESS.
>
>
> Christopher.
>
>
> On Wed, May 25, 2016 7:28 pm, 'Christopher Gregory' via Grase Hotspot
> wrote:
>
>> Hello Tim,
>>
>>
>>
>> Well I guess I spoke too soon with regards to it working.  For some
>> weird reason it stopped and people were not able to login.  For me it
>> stopped resolving domain names but I was able to ping or access websites
>> via the ip address.
>>
>> I went ahead and changed grase to 192.168.0.1 via radmin and rebooted
>> the server.
>>
>> Then this network made a complete liar of me and started issuing ip
>> addresses in the 192.168.0.x range and I was able to log in and once
>> again dns started working correctly.
>>
>> This still has not resolved the issue of the dhcp leases page as the
>> leases are still logged to syslog.
>>
>> I have left the TENDA on 10.0.0.1 as it does not really matter if it
>> can not be accessed remotely as it is only an ap.
>>
>> Do you have any idea why this would suddenly stop working on both
>> wireless and wired?
>>
>> I hope that it runs longer than a day without me having to reboot or
>> otherwise mess around with config files.
>>
>> Regards,
>>
>>
>>
>> Christopher.
>>
>>
>>
>> On Wed, May 25, 2016 4:44 pm, 'Christopher Gregory' via Grase Hotspot
>> wrote:
>>
>>
>>> Hello Tim,
>>>
>>>
>>>
>>>
>>> I am going to detail the exact setup I have here and clarify what I
>>> did/tried in the order that I did it.
>>>
>>> The setup here network wise is this:
>>>
>>>
>>>
>>>
>>> 1) We have a fibre access point on the wall.
>>> 2) A tplink wireless router has the ethernet cable from the fibre
>>> access point plugged into the WAN port on the router. 3) A network
>>> cable is plugged into one of the LAN ports on the tplink wireless
>>> router and plugs into eth0 on the server. 4) On the LAN network we
>>> have the TENDA wireless router, which is setup as an wireless access
>>> point in its settings.  The dhcp functionality is turned off as is the
>>> pppoe username/password, as it is strictly being used to give wireless
>>> access to the internet. I have one network cable plugged into a LAN
>>> port of this TENDA wireless router plugged into eth1 on the server.
>>> Also plugged
>>> into a LAN port is a cable going into a Ethernet over power adapter
>>> which is what I use to connect to the internet and administer the
>>> LAN.
>>>
>>>
>>>
>>> You should now have, I hope, a clear indication of what setup we have
>>>  here.
>>>
>>> Now we were using a windows 2003 server which was running antamedia
>>> hotspot.
>>>
>>> The ipaddress of the LAN was set to static with an ip address of
>>> 192.168.0.5.
>>>
>>>
>>>
>>>
>>> The TENDA had an ip address of 192.168.0.1.  The WAN network card was
>>>  set to a static ip of 192.168.1.2.
>>>
>>> Antamedia handled the dhcp and adding of users etc.
>>>
>>>
>>>
>>>
>>> Now the following is what I did to setup grase:
>>>
>>>
>>>
>>>
>>> 1) Disconnected the windows drive from the motherboard and put in a
>>> 120gig
>>> sata drive.
>>>
>>> 2) I installed debian jessie using expert mode and unchecked desktop
>>> environment and checked ssh and webserver.  I left the system
>>> utilities checked.
>>>
>>> 3) I completed the installation.
>>>
>>>
>>>
>>>
>>>
>>> 4) I ran apt-get update to update the packages and also aptitude
>>> update just to make sure everything was in sync.
>>>
>>> 5) I then did:
>>>
>>>
>>>
>>>
>>> apt-get install sysvinit-core sysvinit-utils cp
>>> /usr/share/sysvinit/inittab /etc/inittab
>>>
>>>
>>>
>>>
>>> rebooted and auto-purged systemd and pinned it and the packages that
>>> depend on it in apt-sources so that it would not install it again.
>>>
>>> 6) I then installed mysql-server, php, phpmyadmin etc.
>>>
>>>
>>>
>>>
>>> 7) I changed the network interface of eth1 to be manual.
>>>
>>>
>>>
>>>
>>> 8) I then went through and installed the grase-repo and installed
>>> grasehotspot.
>>>
>>> As you can see at this point I have changed nothing on the TENDA. I
>>> have left the network strictly alone.
>>>
>>> 9) I then updated apt again and ran apt-get upgrade to make sure that
>>>  everything was at the newest possible level.
>>>
>>> 10) I then rebooted the server and came down to my room and tested
>>> access to the default 10.1.0.1 grase admin interface, which worked
>>> fine. I
>>> changed nothing at all at this stage in grase or on the network.
>>>
>>> 11) I then got people to try and connect to the hotspot just to see
>>> if they could bring up the login page as I had configured no users at
>>> this point.  They were not able to bring up the login page.
>>>
>>> 12) It was then at this point that I logged back into the server and
>>> found that it was actually issuing ip addresses in the 10.0.0.1 range.
>>>
>>>
>>> 13) It was ONLY at this stage that I went in and changed the ip
>>> address and netmask on the TENDA to be in the same range that they
>>> were able to bring up the login page.
>>>
>>> The ONLY change that I made to an out of the box installation was to
>>> COPY
>>> grase from /usr/share into /var/www as it would not bring it up from
>>> the default location.  I had to change grase config to point to the
>>> new location of course.
>>>
>>> If after reading this you still think changing grase would get the
>>> dhcp leases page to work, I am willing to try it.  At this stage
>>> everyone is able to log in and browse the internet using grase.
>>>
>>> I just have no idea why a default installation would not work
>>> straight away.
>>>
>>> As to your question of what model the TENDA is, I would have to get
>>> up the ladder to actually see that.
>>>
>>> Sorry for this rather long and detailed reply but I needed to make
>>> sure that you knew exactly what I did.
>>>
>>> Regards,
>>>
>>>
>>>
>>>
>>> Christopher.
>>>
>>>
>>>
>>>
>>> On Wed, May 25, 2016 9:25 am, Timothy White wrote:
>>>
>>>
>>>
>>>> Hi Christopher
>>>>
>>>>
>>>>
>>>>
>>>>
>>>> If the Wireless "Router" is truely just acting as an Access Point,
>>>> and not routing, then you can ignore what range it's on and just
>>>> configure the Grase Hotspot how you wish. Ideally, you want your
>>>> management IP's on Wireless AP's to be on a different network to
>>>> your clients, so a rogue client can't easily discover the AP's
>>>> management to attempt to break in. If it's a true Access Point, it's
>>>> IP being on
>>>> a different network to the clients and the Grase Hotspot won't stop
>>>> it working, as all it's doing is passing Layer 2 traffic around,
>>>> where IP is Layer 3.
>>>>
>>>> Do you know the model number of the AP?
>>>>
>>>>
>>>>
>>>>
>>>>
>>>> Also, can you try putting Grase onto something like
>>>> 192.168.0.1/255.255.255.0 (your WAN is 192.168.1.0/255.255.255.0 so
>>>> no conflict there). I think you'll find it'll just work regardless
>>>> of your AP's settings. (Note: you'll probably want to reboot after
>>>> changing the IP range, there are some small bugs that a reboot
>>>> fixes)
>>>>
>>>> Tim
>>>>
>>>>
>>>>
>>>>
>>>>
>>>> On Wed, May 25, 2016 at 12:06 AM, 'Christopher Gregory' via Grase
>>>> Hotspot
>>>> <
>>>> gr***t@grasehotspot.org> wrote:
>>>>
>>>>> Hello Tim,
>>>>>
>>>>>
>>>>>
>>>>>
>>>>>
>>>>> I had to change the ip range from the default due to the fact
>>>>> that it was giving out ip addresses in the 10.0.0.x range right
>>>>> after it went live.
>>>>>
>>>>> It was not my choice to use the 255.0.0.0 mask.  The tenda will
>>>>> only accept that mask with the 10.x range. It gave the error that
>>>>> the subnet could not be segmented or something along those lines.
>>>>> I
>>>>> searched google and found someone with the same issue and that was
>>>>>  the manufacturers advice.  When I first did the installation I
>>>>> had not changed the ip address on the wireless router.  It was
>>>>> still set to 192.168.0.1.
>>>>>
>>>>>
>>>>>
>>>>>
>>>>> I want to ditch that wireless router and get one that has
>>>>> gigabyte lan ports.  Wireless access can get a little patchy as
>>>>> the main house is totally concrete.
>>>>>
>>>>> Regards,
>>>>>
>>>>>
>>>>>
>>>>>
>>>>>
>>>>> Christopher.
>>>>>
>>>>>
>>>>>
>>>>>
>>>>>
>>>>> On Wed, May 25, 2016 12:05 am, Timothy White wrote:
>>>>>
>>>>>
>>>>>
>>>>>
>>>>>> I'm not sure why, but the range in the database isn't the
>>>>>> default one. Have you since changed it?
>>>>>>
>>>>>>
>>>>>> 1. #chilli_lanip 10.0.0.2
>>>>>> 2. #chilli_wanif eth0
>>>>>> 3. #chilli_lanif eth1
>>>>>> 4. #chilli_network 10.0.0.0
>>>>>> 5. #chilli_netmask 255.0.0.0
>>>>>>
>>>>>>
>>>>>>
>>>>>>
>>>>>>
>>>>>>
>>>>>>
>>>>>> If you changed the netmask to 255.0.0.0, then even with an IP
>>>>>> of 10.1.0.1
>>>>>> as the server IP, it would start the DHCP range at 10.0.0.1
>>>>>>
>>>>>> A good tool to see ip ranges is sipcalc. You can see that the
>>>>>> start of the range is 10.0.0.1. You also have a stupidly large
>>>>>> IP
>>>>>> range. You
>>>>>>
>>>>>>
>>>>>>
>>>>> should
>>>>>> reduce your netmask to something reasonable, such as
>>>>>> 255.255.255.0,
>>>>>> or 255.255.254.0 if you need more than 250 odd clients.
>>>>>>
>>>>>>
>>>>>>
>>>>>> Tim
>>>>>>
>>>>>>
>>>>>>
>>>>>>
>>>>>>
>>>>>>
>>>>>> $sipcalc 10.1.0.1/8
>>>>>> -[ipv4 : 10.1.0.1/8] - 0
>>>>>>
>>>>>>
>>>>>>
>>>>>>
>>>>>>
>>>>>>
>>>>>> [CIDR]
>>>>>> Host address - 10.1.0.1
>>>>>> Host address (decimal) - 167837697
>>>>>> Host address (hex) - A010001
>>>>>> Network address - 10.0.0.0
>>>>>> Network mask - 255.0.0.0
>>>>>> Network mask (bits) - 8
>>>>>> Network mask (hex) - FF000000
>>>>>> Broadcast address - 10.255.255.255
>>>>>> Cisco wildcard - 0.255.255.255
>>>>>> Addresses in network - 16777216
>>>>>> Network range - 10.0.0.0 - 10.255.255.255
>>>>>> Usable range - 10.0.0.1 - 10.255.255.254
>>>>>>
>>>>>>
>>>>>>
>>>>>>
>>>>>>
>>>>>>
>>>>>>
>>>>>>
>>>>>> On Tue, May 24, 2016 at 9:34 PM, 'christopher' via Grase
>>>>>> Hotspot
>>>>>> <
>>>>>> gr***t@grasehotspot.org> wrote:
>>>>>>
>>>>>>> Hello Tim
>>>>>>>
>>>>>>>
>>>>>>>
>>>>>>>
>>>>>>>
>>>>>>>
>>>>>>> Here is the support information as requested:
>>>>>>>
>>>>>>>
>>>>>>>
>>>>>>>
>>>>>>>
>>>>>>>
>>>>>>> https://paste.grasehotspot.org/view/76b9031d
>>>>>>>
>>>>>>>
>>>>>>>
>>>>>>>
>>>>>>>
>>>>>>>
>>>>>>> With regards to something else giving out the incorrect
>>>>>>> leases, that is not possible.  Reason I can confidently state
>>>>>>> that is that this was on a fresh install of Debian.
>>>>>>>
>>>>>>> When I encountered that error ie after the fresh install I
>>>>>>> did indeed check in radmin page and the 10.1.0.1 ip was listed
>>>>>>>  there. I then did a complete wipe of the harddrive again and
>>>>>>> a fresh install of Debian. The wireless router before this
>>>>>>> installation had an ip address of 192.168.0.1 and dhcp was not
>>>>>>> enabled on it as we were using a windows based commercial
>>>>>>> hotspot which handled the dhcp itself, and that harddrive is
>>>>>>> physically disconnected from the motherboard.
>>>>>>>
>>>>>>> I am totally puzzled as to where the dhcp range was being
>>>>>>> allocated from. I am the only one who administers the network.
>>>>>>>  I
>>>>>>> checked after the second clean installation and the only dhcp
>>>>>>> that is installed is dhcp-client.
>>>>>>>
>>>>>>> The  /etc/dnsmasq.d/01-grasehotspot after both installs had
>>>>>>> shown the default per your instructions ip address of
>>>>>>> 10.1.0.1.
>>>>>>>
>>>>>>>
>>>>>>> I could accept that on a server that had been running that
>>>>>>> things can go wrong, which is why I find that after I have
>>>>>>> been testing things out and made changes that I do a complete
>>>>>>> re-installation of the operating system prior to putting the
>>>>>>> server into use.
>>>>>>>
>>>>>>> Before installing gracehotspot or anything else I purged
>>>>>>> systemd. I will not use systemd in a production environment at
>>>>>>> this stage, even though I have tested it out for a couple of
>>>>>>> years on my own computer.
>>>>>>>
>>>>>>> I normally compile the whole os from scratch, but as the
>>>>>>> owner of the backpackers is not an IT person it is better to
>>>>>>> have a system that can get regular security updates.
>>>>>>>
>>>>>>> I am glad to be finally rid of windows 2003 server.
>>>>>>>
>>>>>>>
>>>>>>>
>>>>>>>
>>>>>>>
>>>>>>>
>>>>>>> It may well be that we will never work out exactly where it
>>>>>>> was picking the ip pool up from.  I just hate mysteries like
>>>>>>> that.
>>>>>>>
>>>>>>>
>>>>>>> Regards,
>>>>>>>
>>>>>>>
>>>>>>>
>>>>>>>
>>>>>>>
>>>>>>>
>>>>>>> Chrristopher.
>>>>>>>
>>>>>>>
>>>>>>>
>>>>>>>
>>>>>>>
>>>>>>>
>>>>>>>
>>>>>>> On Tuesday, 24 May 2016 22:09:04 UTC+12, timwhite88 wrote:
>>>>>>>
>>>>>>>
>>>>>>>
>>>>>>>
>>>>>>>
>>>>>>>>
>>>>>>>> Hi Christopher
>>>>>>>>
>>>>>>>>
>>>>>>>>
>>>>>>>>
>>>>>>>>
>>>>>>>>
>>>>>>>> It may help to collect support information as stated on
>>>>>>>> https://grasehotspot.org/support/collecting-support-informat
>>>>>>>> io n/ The IP range that is served is set in the Admin
>>>>>>>> interface. You
>>>>>>>> can see on the demo version the correct location (
>>>>>>>> http://demo.grasehotspot.org/grase/radmin/netconfig)
>>>>>>>>
>>>>>>>>
>>>>>>>>
>>>>>>>>
>>>>>>>>
>>>>>>>>
>>>>>>>> You can also check /etc/dnsmasq.d/01-grasehotspot to see
>>>>>>>> that the settings are actually being sent as expected. That
>>>>>>>> file is used by dnsmasq and coova-chilli to load the network
>>>>>>>> range. I
>>>>>>>> wonder if you somehow have something other than coova-chilli
>>>>>>>>  serving DHCP, and hence that's why it's not appear in the
>>>>>>>> DHCP
>>>>>>>> leases page, and also giving the correct lease.
>>>>>>>>
>>>>>>>> I have a Debian Jessie testing machine, so I'll check that
>>>>>>>> DHCP
>>>>>>>> leases page works for me.
>>>>>>>>
>>>>>>>> Tim
>>>>>>>>
>>>>>>>>
>>>>>>>>
>>>>>>>>
>>>>>>>>
>>>>>>>>
>>>>>>>> On Tue, May 24, 2016 at 6:24 PM, 'christopher' via Grase
>>>>>>>> Hotspot
>>>>>>>> <
>>>>>>>> gr***.@grasehotspot.org> wrote:
>>>>>>>>
>>>>>>>>> Hello,
>>>>>>>>>
>>>>>>>>>
>>>>>>>>>
>>>>>>>>>
>>>>>>>>>
>>>>>>>>>
>>>>>>>>> After attempting to get daloradius, freeradius, mysql and
>>>>>>>>>  dhcp to work nicely together I discovered grasehotspot
>>>>>>>>> so I did a fresh install of Debian Jessie.  No desktop
>>>>>>>>> just LAMP and ssh server.
>>>>>>>>>
>>>>>>>>>
>>>>>>>>> After installing gracehotspot the admin url etc is
>>>>>>>>> 10.1.0.1,
>>>>>>>>> so I had assumed that this is the range that would hand
>>>>>>>>> out ip addresses. After people failing to obtain an ip
>>>>>>>>> address I checked the iptables --list and it showed all
>>>>>>>>> the forwarding rules with the 10.1.0.1 range as you would
>>>>>>>>> expect.  What I did not expect and really would
>>>>>>>>> appreciate knowing where in the config files to find it,
>>>>>>>>> is that for some bizzar reason it was allocating ip
>>>>>>>>> addresses in the 10.0.0.0 range.
>>>>>>>>>
>>>>>>>>>
>>>>>>>>>
>>>>>>>>>
>>>>>>>>>
>>>>>>>>> I ended up changing the ip address on the wireless router
>>>>>>>>>  to the 10.0.0.x range, and having to change the default
>>>>>>>>> 10.1.0.1
>>>>>>>>> settings used for the installation.
>>>>>>>>>
>>>>>>>>> The setup we have here is that there is an tplink
>>>>>>>>> wireless router on the wall (dhcp is disabled on it so no
>>>>>>>>> dhcp there) with the ethernet cable plugged into a
>>>>>>>>> straight ethernet port rather than the wan port.  This
>>>>>>>>> then goes to the server and plugs into eth1.  Eth0 goes to
>>>>>>>>> another tplink gigabit wireless router that is plugged
>>>>>>>>> into the Fibre access point. Wireless is turned off for
>>>>>>>>> this device.
>>>>>>>>>
>>>>>>>>>
>>>>>>>>> I had a poke around in the mysql database using
>>>>>>>>> phpmyadmin but was not able to find it there.
>>>>>>>>>
>>>>>>>>> As previous people have mentioned, the re-directs to the
>>>>>>>>> login page were not working here either.  We are a
>>>>>>>>> backpackers and have people with tablets, iphones, mac's
>>>>>>>>> windows pc's android phones of various ages all behaving
>>>>>>>>> the same way.
>>>>>>>>>
>>>>>>>>> I downloaded the fixed version of coova-chilli and it
>>>>>>>>> started working.
>>>>>>>>>
>>>>>>>>> The one thing that is not working, and I would like it
>>>>>>>>> to, is that on the dhcp leases page nothing is shown
>>>>>>>>> there.  It all gets posted to syslog.  What file do I need
>>>>>>>>> to change in order to make the leases show up there?
>>>>>>>>>
>>>>>>>>> Regards,
>>>>>>>>>
>>>>>>>>>
>>>>>>>>>
>>>>>>>>>
>>>>>>>>>
>>>>>>>>>
>>>>>>>>> Christopher.
>>>>>>>>>
>>>>>>>>>
>>>>>>>>>
>>>>>>>>>
>>>>>>>>>
>>>>>>>>>
>>>>>>>>> --
>>>>>>>>> This mailing list is for the Grase Hotspot Project
>>>>>>>>> http://grasehotspot.org
>>>>>>>>> ---
>>>>>>>>> You received this message because you are subscribed to
>>>>>>>>> the Google
>>>>>>>>> Groups "Grase Hotspot" group.
>>>>>>>>> To unsubscribe from this group and stop receiving emails
>>>>>>>>> from it, send an email to
>>>>>>>>> gr***.@grasehotspot.org. To post
>>>>>>>>> to this group, send email to gr***.@grasehotspot.org.
>>>>>>>>> Visit
>>>>>>>>> this group at
>>>>>>>>> https://groups.google.com/a/grasehotspot.org/group/grase-
>>>>>>>>> ho ts po t/. To view this discussion on the web visit
>>>>>>>>> https://groups.google.com/a/grasehotspot.org/d/msgid/gras
>>>>>>>>> e- ho tsp ot/4
>>>>>>>>> 8630296-537e-4fff-9a92-234766cea8a2%40grasehotspot.org
>>>>>>>>> <https://groups.google.com/a/grasehotspot.org/d/msgid/gras
>>>>>>>>> e- ho ts pot/
>>>>>>>>> 48630296-537e-4fff-9a92-234766cea8a2%40grasehotspot.org?u
>>>>>>>>> tm _m
>>>>>>>>> ed ium= email&utm_source=footer> .
>>>>>>>>>
>>>>>>>>>
>>>>>>>>
>>>>>>>> --
>>>>>>>>
>>>>>>>>
>>>>>>>>
>>>>>>>>
>>>>>>>>
>>>>>>> This mailing list is for the Grase Hotspot Project
>>>>>>> http://grasehotspot.org
>>>>>>> ---
>>>>>>> You received this message because you are subscribed to the
>>>>>>> Google
>>>>>>> Groups
>>>>>>> "Grase Hotspot" group.
>>>>>>> To unsubscribe from this group and stop receiving emails from
>>>>>>> it, send an email to
>>>>>>> gr***e@grasehotspot.org. To
>>>>>>> post to this group, send email to
>>>>>>> gr***t@grasehotspot.org. Visit this group
>>>>> at
>>>>>>> https://groups.google.com/a/grasehotspot.org/group/grase-hots
>>>>>>> po t/ . To view this discussion on the web visit
>>>>>>>
>>>>>>>
>>>>>>>
>>>>>>>
>>>>>>>
>>>>> https://groups.google.com/a/grasehotspot.org/d/msgid/grase-hotspo
>>>>> t/ 84
>>>>> 87
>>>>> 0
>>>>>
>>>>>
>>>>>
>>>>>
>>>>>>> b6b-dc3a-4e10-ad78-a1ffdaa094b4%40grasehotspot.org
>>>>>>> <https://groups.google.com/a/grasehotspot.org/d/msgid/grase-h
>>>>>>> ot sp ot /848
>>>>>>> 70b6b-dc3a-4e10-ad78-a1ffdaa094b4%40grasehotspot.org?utm_medi
>>>>>>> um =em
>>>>>>> ai l&u tm_source=footer> .
>>>>>>>
>>>>>>>
>>>>>>
>>>>>> --
>>>>>> This mailing list is for the Grase Hotspot Project
>>>>>>
>>>>>>
>>>>>>
>>>>>>
>>>>> http://grasehotspot.org
>>>>>
>>>>>
>>>>>
>>>>>
>>>>>> ---
>>>>>> You received this message because you are subscribed to the
>>>>>> Google
>>>>>> Groups
>>>>>> "Grase Hotspot" group.
>>>>>> To unsubscribe from this group and stop receiving emails from
>>>>>> it, send an email to gr***e@grasehotspot.org.
>>>>>> To
>>>>>> post to this group, send email to
>>>>>> gr***t@grasehotspot.org. Visit
>>>>>> this group at
>>>>>> https://groups.google.com/a/grasehotspot.org/group/grase-hotspo
>>>>>> t/ .
>>>>>> To view this discussion on the web visit
>>>>>>
>>>>>>
>>>>>>
>>>>>>
>>>>>>
>>>>> https://groups.google.com/a/grasehotspot.org/d/msgid/grase-hotspo
>>>>> t/ CA
>>>>> ES
>>>>> Lx
>>>>>
>>>>>
>>>>>
>>>>>
>>>>>> 0LB7vTSfYK61%3Daz5ajWZgGtHvr%2B4ABeyLZ%3DcrjpVtNnrQ%40mail.gmai
>>>>>> l. co m.
>>>>>>
>>>>>>
>>>>>>
>>>>>
>>>>>
>>>>> --
>>>>> This mailing list is for the Grase Hotspot Project
>>>>> http://grasehotspot.org
>>>>> ---
>>>>> You received this message because you are subscribed to the Google
>>>>>  Groups
>>>>> "Grase Hotspot" group.
>>>>> To unsubscribe from this group and stop receiving emails from it,
>>>>> send an email to gr***e@grasehotspot.org. To
>>>>> post to this group, send email to gr***t@grasehotspot.org.
>>>>> Visit
>>>>> this group at
>>>>> https://groups.google.com/a/grasehotspot.org/group/grase-hotspot/
>>>>> .
>>>>> To view this discussion on the web visit
>>>>> https://groups.google.com/a/grasehotspot.org/d/msgid/grase-hotspot
>>>>> /e
>>>>> 75
>>>>> 2c
>>>>> a2db889a8df05bdf818b0fdee0c.squirrel%40www.pc-networking-services.
>>>>> co m .
>>>>>
>>>>>
>>>>>
>>>>>
>>>>
>>>> --
>>>> This mailing list is for the Grase Hotspot Project
>>>> http://grasehotspot.org
>>>> ---
>>>> You received this message because you are subscribed to the Google
>>>> Groups
>>>> "Grase Hotspot" group.
>>>> To unsubscribe from this group and stop receiving emails from it,
>>>> send an email to gr***e@grasehotspot.org. To post
>>>> to this group, send email to gr***t@grasehotspot.org. Visit
>>>> this group at
>>>> https://groups.google.com/a/grasehotspot.org/group/grase-hotspot/.
>>>> To view this discussion on the web visit
>>>> https://groups.google.com/a/grasehotspot.org/d/msgid/grase-hotspot/C
>>>> AE
>>>> SL
>>>> x 0L0pW%3DoDftgbpjChp0a2yrx5H0Z4tdxHTpUOCsH7nckVA%40mail.gmail.com.
>>>>
>>>>
>>>>
>>>
>>>
>>> --
>>> This mailing list is for the Grase Hotspot Project
>>> http://grasehotspot.org
>>> ---
>>> You received this message because you are subscribed to the Google
>>> Groups
>>> "Grase Hotspot" group.
>>> To unsubscribe from this group and stop receiving emails from it, send
>>>  an email to gr***e@grasehotspot.org. To post to
>>> this group, send email to gr***t@grasehotspot.org. Visit this
>>> group at
>>> https://groups.google.com/a/grasehotspot.org/group/grase-hotspot/.
>>> To view this discussion on the web visit
>>> https://groups.google.com/a/grasehotspot.org/d/msgid/grase-hotspot/1bc
>>> 05
>>> e
>>> fba8e27642b26793d7b7efbb0f.squirrel%40www.pc-networking-services.com.
>>>
>>>
>>
>>
>> --
>> This mailing list is for the Grase Hotspot Project
>> http://grasehotspot.org
>> ---
>> You received this message because you are subscribed to the Google
>> Groups
>> "Grase Hotspot" group.
>> To unsubscribe from this group and stop receiving emails from it, send
>> an email to gr***e@grasehotspot.org. To post to this
>> group, send email to gr***t@grasehotspot.org. Visit this group
>> at https://groups.google.com/a/grasehotspot.org/group/grase-hotspot/.
>> To view this discussion on the web visit
>> https://groups.google.com/a/grasehotspot.org/d/msgid/grase-hotspot/60fa4
>> 4
>> 3a498d9cba0b535314e583bcec.squirrel%40www.pc-networking-services.com.
>>
>>
>>
>
>
> --
> This mailing list is for the Grase Hotspot Project http://grasehotspot.org
>  ---
> You received this message because you are subscribed to the Google Groups
> "Grase Hotspot" group.
> To unsubscribe from this group and stop receiving emails from it, send an
> email to gr***e@grasehotspot.org. To post to this
> group, send email to gr***t@grasehotspot.org. Visit this group at
> https://groups.google.com/a/grasehotspot.org/group/grase-hotspot/.
> To view this discussion on the web visit
> https://groups.google.com/a/grasehotspot.org/d/msgid/grase-hotspot/a452c6
> 159d74c7302de5dfd6ff941729.squirrel%40www.pc-networking-services.com.
>
>

Thread