2014-08-16 - Re: [GRASE-Hotspot] Eth0 and Wlan0 problems

Header Data

From: drazen <dr***a@radez.hr>
Message Hash: e3a640e273a2cb7a1c4fb8f12c8874e91dde03532018a273cf587c17dfd568e0
Message ID: <53EF1588.2090407@radez.hr>
Reply To: <b2ce59e4-f7ac-41af-8e16-7def684e0b89@grasehotspot.org>
UTC Datetime: 2014-08-16 01:25:44 UTC
Raw Date: Sat, 16 Aug 2014 10:25:44 +0200

Raw message 

Hi Eliot,
"...Ubuntu 12.04
Atom 330 with 1x eth giga
1x usb tp-link 722n ( recognized and working ok ) .."

guess this above is your Grase hardware.
Can you connect your PC/NB by wire to Grase LAN and test that is 
everything working  OK?

Next step would be setting of 1043/OpenWRT. Your should set router LAN 
as static IP from 10.1.0.0 range. Disable DHCP. Disable router WAN port. 
Set working mode as AP.  Go trough all OpenWRT settings and disable any 
unecessary option. Specially if any QOS or restrictions active at 1043 
itself.
Connect LAN port No1. of 1043 by wire to grase box.
Try wireless client and check connection properties. IP, Gateway, DNS if 
all received correctly.

Regarding static IP of router , you should change Chilly  DHCP range . 
E.g. set lower end to 10.1.0.20, then use addresses bellow that for 
static addresses.


On 08/16/2014 03:30 AM, Eliot Ness wrote:
> Lets see what i test , and where i stuck...
> Ubuntu 12.04
> Atom 330 with 1x eth giga
> 1x usb tp-link 722n ( recognized and working ok )
>
> Grase installed and working ok, but after browsing pages 2 -3 minutes 
> comes up extremly slow, or not connected.
>
> Eth0 and Wlan0 recognized ok on grase
> Eth0 is connected on a dsl modem DHCP and get a dedicated ip paired to 
> mac address 192.168.1.50 internet ready to run
> Wlan0 is connected on a tp-link 1043nd with modified openwrt default 
> ip 192.168.1.1 .... (here is the problem)
>
> Essid on 1043nd is open, no wep, no wpa, DHCP disabled
> If i disable also auto connect and DHCP on wlan0 it never connect
> If static ip (192.168.1.2) on wlan0 it connects and looking ok, but as 
> i say above after 2-3 minutes of browsing with grase login it goes 
> slow to extremly slow.
>
> How to connect wlan0 to ap correctly TIM?
> Thank you in advance!
>
>
> -- 
> This mailing list is for the Grase Hotspot Project http://grasehotspot.org
> ---
> You received this message because you are subscribed to the Google 
> Groups "Grase Hotspot" group.
> To unsubscribe from this group and stop receiving emails from it, send 
> an email to gr***e@grasehotspot.org 
> <mailto:gr***e@grasehotspot.org>.
> To post to this group, send email to gr***t@grasehotspot.org 
> <mailto:gr***t@grasehotspot.org>.
> Visit this group at 
> http://groups.google.com/a/grasehotspot.org/group/grase-hotspot/.
> To view this discussion on the web visit 
> https://groups.google.com/a/grasehotspot.org/d/msgid/grase-hotspot/b2ce59e4-f7ac-41af-8e16-7def684e0b89%40grasehotspot.org 
> <https://groups.google.com/a/grasehotspot.org/d/msgid/grase-hotspot/b2ce59e4-f7ac-41af-8e16-7def684e0b89%40grasehotspot.org?utm_medium=email&utm_source=footer>.

Thread