2015-12-11 - Re: [GRASE-Hotspot] Access Point Configuration

Header Data

From: Gary Wright <wr***g@gmail.com>
Message Hash: 0f29987981d7635936c14187e07ffd672e87d25bbbb77f77575c67acb2ae0c8b
Message ID: <CAA_X3qdDszkQR8FaBEX4kvkMc3r7S1r=ZkN2MvtLiLkU+_M9FQ@mail.gmail.com>
Reply To: <566B0D95.8020604@radez.hr>
UTC Datetime: 2015-12-11 12:22:02 UTC
Raw Date: Fri, 11 Dec 2015 11:22:02 -0800

Raw message 

Thanks Drazen - I'll try that tonight.  Great idea to determine root cause.

Gary Wright
951-514-1632 Cell
760-730-6603 Home
wr***g@gmail.com


On Fri, Dec 11, 2015 at 9:53 AM, drazen <dr***a@radez.hr> wrote:

> Lets go basic check.
> Leave that AP out.
> Can you connect your desktop or notebook by wire to grase LAN side?
> When you do that, your desktop/notebook network card must get IP from
> grase in range 10.1.0.xx
> (this will NOT happen if Grase is set up wrong, or your desktop card has
> static preset)
>
> If OK, when you open browser you should get grase log-in page.
> You will NOT receive login page if your network card MAC is already
> registered computer account at grase.
> In both cases, with log-in or without, you should reach internet. You
> should reach grase web interface too:
> 10.1.0.1/grase/radmin/
>
> If everything as explained I would say that Grase setting is ok and it is
> working correctly.
>
> Now the most probably, your AP is doing DHCP. It should be turned off.
> Check this detail and try again.
>
>
>
>
>
> On 12/11/2015 03:07 PM, Gary Wright wrote:
>
> I think I'm almost there.  What is weird is when I connect my AP I cannot
> access the internet anymore from my server.
>
>
>
> Is this supposed to be happening; two scenarios:
>
> 1.  When the AP is not plugged into grase server, and I can access the
> internet, WAN is set to eth0 and LAN is set to enth1 as it shows in
> ifconfig.
>
> 2.  When I plug in the AP to the grase server, it flips.  It says WAN is
> on eth1 and LAN is on eth0, yet on the status page it shows WAN on eth0 and
> LAN on tun0
>
> 3. When plugged in I can connect to my SSID (grace guest), but I don't get
> a grase login.
>
> Is that right?
>
> Gary Wright
> 951-514-1632 Cell
> 760-730-6603 Home
> wr***g@gmail.com
>
>
> On Thu, Dec 10, 2015 at 11:45 AM, drazen <dr***a@radez.hr> wrote:
>
>> That is correct. This is what i suggest you couple of weeks ago.
>>
>>
>> On 12/10/2015 07:56 PM, Gary Wright wrote:
>>
>> Thanks Drazen.  I actually meant the IP of my AP.  It should not be in
>> the DHCP range of the clients, correct?
>>
>> Sent from Gary Wrights iPhone -
>> 951-514-1632
>>
>> On Dec 10, 2015, at 7:42 AM, drazen < <dr***a@radez.hr>
>> dr***a@radez.hr> wrote:
>>
>> Partly correct
>> Last address from subnet range depends of "netmask" If netmask is
>> 255.255.255.0 only 255 adress available. So 10.1.0.1 to 10.1.0.255
>> I suggest you some online IP calculator or android app at play store. The
>> are plenty handy ones.
>>
>>
>> On 12/10/2015 02:19 PM, Gary Wright wrote:
>>
>> But the IP needs to be in the 10.1.0. Range correct?  If I start DHCP at
>> 11 then my last octet could be 10,9,8...?
>>
>> Sent from Gary Wrights iPhone -
>> 951-514-1632
>>
>> On Dec 10, 2015, at 2:09 AM, Timothy White <ti***8@gmail.com> wrote:
>>
>> Hi Gary
>>
>> I'm not familar with this device. However, you will need SSID's on your
>> radios, otherwise there isn't anything for your clients to connect to.
>> Then, you probably just need to bridge the Radios to the Ethernet I think.
>> You also probably don't want your Ethernet to have an IP in the Grase
>> Hotspot range, as that IP will be given out to clients unless you adjust
>> your DHCP range.
>>
>> Regards
>>
>> Tim
>>
>> On Thu, Dec 10, 2015 at 2:13 PM, Gary Wright <
>> <wr***g@gmail.com>wr***g@gmail.com> wrote:
>>
>>> This is my configuration on my 1130ag access point.  Is this correct?
>>> Do I need to set an SSID on the ap?  I see neither of my Radio's have IP's?
>>> interface Dot11Radio0
>>>  no ip address
>>>  no ip route-cache
>>>  shutdown
>>>  station-role root
>>>  bridge-group 1
>>>  bridge-group 1 subscriber-loop-control
>>>  bridge-group 1 block-unknown-source
>>>  no bridge-group 1 source-learning
>>>  no bridge-group 1 unicast-flooding
>>>  bridge-group 1 spanning-disabled
>>> !
>>> interface Dot11Radio1
>>>  no ip address
>>>  no ip route-cache
>>>  shutdown
>>>  dfs band 3 block
>>>  channel dfs
>>>  station-role root
>>>  bridge-group 1
>>>  bridge-group 1 subscriber-loop-control
>>>  bridge-group 1 block-unknown-source
>>>  no bridge-group 1 source-learning
>>>  no bridge-group 1 unicast-flooding
>>>  bridge-group 1 spanning-disabled
>>> !
>>> interface FastEthernet0
>>>  no ip address
>>>  no ip route-cache
>>>  duplex auto
>>>  speed auto
>>>  bridge-group 1
>>>  no bridge-group 1 source-learning
>>>  bridge-group 1 spanning-disabled
>>> !
>>> interface BVI1
>>>  ip address 10.1.0.2 255.255.255.0
>>>  no ip route-cache
>>> !
>>> ip default-gateway 10.1.0.1
>>> ip http server
>>> no ip http secure-server
>>> ip http help-path
>>> <http://www.cisco.com/warp/public/779/smbiz/prodconfig/help/eag>
>>> http://www.cisco.com/warp/public/779/smbiz/prodconfig/help/eag
>>> bridge 1 route ip
>>> !
>>> !
>>> !
>>> line con 0
>>> line vty 0 4
>>>  login local
>>> !
>>> end
>>>
>>>
>>>
>>> Gary Wright
>>> 951-514-1632 Cell
>>> 760-730-6603 Home
>>> <wr***g@gmail.com>wr***g@gmail.com
>>>
>>>
>>> On Wed, Nov 25, 2015 at 12:34 PM, drazen < <dr***a@radez.hr>
>>> dr***a@radez.hr> wrote:
>>>
>>>> Adjustment at Wifi radio device:
>>>> 1. Wireless interface working mode "AP"
>>>> 2. Disable DHCP on device
>>>> 3. No any encription on interface (no WPA WEP ,) leave it "open"
>>>> 4. LAN port set to static IP. Say 10.1.0.2 (This is for easy
>>>> administration device in the future)
>>>> 5. Network mode "Bridge" (This may be optional)
>>>>
>>>> Adjustment at Grase:
>>>> 6. set DHCPStart to 11 (at least.)
>>>> So Grase is at 10.1.0.1 . You will have 10.1.0.2 up to 10.1.0.10
>>>> available for you static devices.
>>>>
>>>> 1. to 3. are extremely important.
>>>>
>>>> Drazen
>>>>
>>>>
>>>>
>>>> On 11/25/2015 06:04 PM, Gary Wright wrote:
>>>>
>>>>> I just finished successfully loading grasehotspot.  I don't see any
>>>>> recommended configure settings for AP's?  Did I miss that somewhere?
>>>>>
>>>>> I'm using a Cisco 1130 for my church guest access.
>>>>>
>>>>> Typical setting would be nice.
>>>>>
>>>>> Thanks
>>>>> Gary
>>>>>
>>>>>
>>>> --
>>>> This mailing list is for the Grase Hotspot Project
>>>> <http://grasehotspot.org>http://grasehotspot.org
>>>> --- You received this message because you are subscribed to the Google
>>>> Groups "Grase Hotspot" group.
>>>> To unsubscribe from this group and stop receiving emails from it, send
>>>> an email to <gr***e@grasehotspot.org>
>>>> gr***e@grasehotspot.org.
>>>> To post to this group, send email to <gr***t@grasehotspot.org>
>>>> gr***t@grasehotspot.org.
>>>> Visit this group at
>>>> <http://groups.google.com/a/grasehotspot.org/group/grase-hotspot/>
>>>> http://groups.google.com/a/grasehotspot.org/group/grase-hotspot/.
>>>> To view this discussion on the web visit
>>>> <https://groups.google.com/a/grasehotspot.org/d/msgid/grase-hotspot/56561B47.1030007%40radez.hr>
>>>> https://groups.google.com/a/grasehotspot.org/d/msgid/grase-hotspot/56561B47.1030007%40radez.hr
>>>> .
>>>>
>>>
>>> --
>>> This mailing list is for the Grase Hotspot Project
>>> <http://grasehotspot.org>http://grasehotspot.org
>>> ---
>>> You received this message because you are subscribed to the Google
>>> Groups "Grase Hotspot" group.
>>> To unsubscribe from this group and stop receiving emails from it, send
>>> an email to <gr***e@grasehotspot.org>
>>> gr***e@grasehotspot.org.
>>> To post to this group, send email to <gr***t@grasehotspot.org>
>>> gr***t@grasehotspot.org.
>>> Visit this group at
>>> <http://groups.google.com/a/grasehotspot.org/group/grase-hotspot/>
>>> http://groups.google.com/a/grasehotspot.org/group/grase-hotspot/.
>>> To view this discussion on the web visit
>>> https://groups.google.com/a/grasehotspot.org/d/msgid/grase-hotspot/CAA_X3qfmdoUMRQhZ7DT-A6RVftgdknWkvm97D78ubdDG35UtRA%40mail.gmail.com
>>> .
>>>
>>
>> --
>> This mailing list is for the Grase Hotspot Project
>> http://grasehotspot.org
>> ---
>> You received this message because you are subscribed to the Google Groups
>> "Grase Hotspot" group.
>> To unsubscribe from this group and stop receiving emails from it, send an
>> email to gr***e@grasehotspot.org.
>> To post to this group, send email to <gr***t@grasehotspot.org>
>> gr***t@grasehotspot.org.
>> Visit this group at
>> <http://groups.google.com/a/grasehotspot.org/group/grase-hotspot/>
>> http://groups.google.com/a/grasehotspot.org/group/grase-hotspot/.
>> To view this discussion on the web visit
>> <https://groups.google.com/a/grasehotspot.org/d/msgid/grase-hotspot/CAESLx0JH3J6LLQFFDrNwTxwJM8JMB73AO%2ByxAPSSMKHe7ZJzMA%40mail.gmail.com>
>> https://groups.google.com/a/grasehotspot.org/d/msgid/grase-hotspot/CAESLx0JH3J6LLQFFDrNwTxwJM8JMB73AO%2ByxAPSSMKHe7ZJzMA%40mail.gmail.com
>> .
>>
>> --
>> This mailing list is for the Grase Hotspot Project
>> http://grasehotspot.org
>> ---
>> You received this message because you are subscribed to the Google Groups
>> "Grase Hotspot" group.
>> To unsubscribe from this group and stop receiving emails from it, send an
>> email to <gr***e@grasehotspot.org>
>> gr***e@grasehotspot.org.
>> To post to this group, send email to <gr***t@grasehotspot.org>
>> gr***t@grasehotspot.org.
>> Visit this group at
>> http://groups.google.com/a/grasehotspot.org/group/grase-hotspot/.
>> To view this discussion on the web visit
>> <https://groups.google.com/a/grasehotspot.org/d/msgid/grase-hotspot/206ED70E-AAE2-409A-B071-BF1AD0275F67%40gmail.com>
>> https://groups.google.com/a/grasehotspot.org/d/msgid/grase-hotspot/206ED70E-AAE2-409A-B071-BF1AD0275F67%40gmail.com
>> .
>>
>>
>> --
>> This mailing list is for the Grase Hotspot Project
>> http://grasehotspot.org
>> ---
>> You received this message because you are subscribed to the Google Groups
>> "Grase Hotspot" group.
>> To unsubscribe from this group and stop receiving emails from it, send an
>> email to <gr***e@grasehotspot.org>
>> gr***e@grasehotspot.org.
>> To post to this group, send email to <gr***t@grasehotspot.org>
>> gr***t@grasehotspot.org.
>> Visit this group at
>> http://groups.google.com/a/grasehotspot.org/group/grase-hotspot/.
>> To view this discussion on the web visit
>> <https://groups.google.com/a/grasehotspot.org/d/msgid/grase-hotspot/56699D4B.6050402%40radez.hr>
>> https://groups.google.com/a/grasehotspot.org/d/msgid/grase-hotspot/56699D4B.6050402%40radez.hr
>> .
>>
>> --
>> This mailing list is for the Grase Hotspot Project
>> <http://grasehotspot.org>http://grasehotspot.org
>> ---
>> You received this message because you are subscribed to the Google Groups
>> "Grase Hotspot" group.
>> To unsubscribe from this group and stop receiving emails from it, send an
>> email to <gr***e@grasehotspot.org>
>> gr***e@grasehotspot.org.
>> To post to this group, send email to <gr***t@grasehotspot.org>
>> gr***t@grasehotspot.org.
>> Visit this group at
>> http://groups.google.com/a/grasehotspot.org/group/grase-hotspot/.
>> To view this discussion on the web visit
>> <https://groups.google.com/a/grasehotspot.org/d/msgid/grase-hotspot/509DE854-3732-41DD-B81C-16DE0E83780A%40gmail.com>
>> https://groups.google.com/a/grasehotspot.org/d/msgid/grase-hotspot/509DE854-3732-41DD-B81C-16DE0E83780A%40gmail.com
>> .
>>
>>
>> --
>> This mailing list is for the Grase Hotspot Project
>> <http://grasehotspot.org>http://grasehotspot.org
>> ---
>> You received this message because you are subscribed to the Google Groups
>> "Grase Hotspot" group.
>> To unsubscribe from this group and stop receiving emails from it, send an
>> email to gr***e@grasehotspot.org.
>> To post to this group, send email to <gr***t@grasehotspot.org>
>> gr***t@grasehotspot.org.
>> Visit this group at
>> http://groups.google.com/a/grasehotspot.org/group/grase-hotspot/.
>> To view this discussion on the web visit
>> <https://groups.google.com/a/grasehotspot.org/d/msgid/grase-hotspot/5669D65D.7040702%40radez.hr?utm_medium=email&utm_source=footer>
>> https://groups.google.com/a/grasehotspot.org/d/msgid/grase-hotspot/5669D65D.7040702%40radez.hr
>> .
>>
>
> --
> This mailing list is for the Grase Hotspot Project
> <http://grasehotspot.org>http://grasehotspot.org
> ---
> You received this message because you are subscribed to the Google Groups
> "Grase Hotspot" group.
> To unsubscribe from this group and stop receiving emails from it, send an
> email to gr***e@grasehotspot.org.
> To post to this group, send email to gr***t@grasehotspot.org.
> Visit this group at
> http://groups.google.com/a/grasehotspot.org/group/grase-hotspot/.
> To view this discussion on the web visit
> <https://groups.google.com/a/grasehotspot.org/d/msgid/grase-hotspot/CAA_X3qe4uM2%3D0GGZ8AQbBo_O4_MuvxgerGrBjb%2B0TChXGxp3-w%40mail.gmail.com?utm_medium=email&utm_source=footer>
> https://groups.google.com/a/grasehotspot.org/d/msgid/grase-hotspot/CAA_X3qe4uM2%3D0GGZ8AQbBo_O4_MuvxgerGrBjb%2B0TChXGxp3-w%40mail.gmail.com
> .
>
>
> --
> This mailing list is for the Grase Hotspot Project http://grasehotspot.org
> ---
> You received this message because you are subscribed to the Google Groups
> "Grase Hotspot" group.
> To unsubscribe from this group and stop receiving emails from it, send an
> email to gr***e@grasehotspot.org.
> To post to this group, send email to gr***t@grasehotspot.org.
> Visit this group at
> http://groups.google.com/a/grasehotspot.org/group/grase-hotspot/.
> To view this discussion on the web visit
> https://groups.google.com/a/grasehotspot.org/d/msgid/grase-hotspot/566B0D95.8020604%40radez.hr
> <https://groups.google.com/a/grasehotspot.org/d/msgid/grase-hotspot/566B0D95.8020604%40radez.hr?utm_medium=email&utm_source=footer>
> .
>

Thread