2016-05-30 - Re: [GRASE-Hotspot] Re: Grase Hotspot working with DD-WRT routers in remote locations.

Header Data

From: Norberto Esteves <no***e@gmail.com>
Message Hash: 7a44937084dc75fe7e6f9b3753094bcc0e4bc928bdb375465efe35a6b61698f6
Message ID: <c6ca4ea3-8b2d-4c43-9fa7-959540214489@grasehotspot.org>
Reply To: <205375b6-59af-1674-6bbc-dbd11bb71374@radez.hr>
UTC Datetime: 2016-05-30 07:04:15 UTC
Raw Date: Mon, 30 May 2016 07:04:15 -0700

Raw message 



Hi Drazen,

 

Rooaming between Routers with different Chilli is not possible. You always 
get a new IP when moving from one chilli to another.

 

I use this configuration with several sites, each site has only one Chilli 
(DD-WRT) runing (I use Netgear WNDR3700V4 And R7000). I use several APs on 
the LAN side, all of them in bridge mode, this way Chilli assigns IPs to 
every client. This configuration allow roaming between APs so you can move 
inside the site without loosing connection.

If you move to another site you will get a different IP and you will need 
to login again.


Regards,




  

segunda-feira, 30 de Maio de 2016 às 13:33:08 UTC+1, drazen.zuvela escreveu:
>
> Hi Norberto,
>
> I just expanding local WiFi network based on your receipt for remote Grase 
> access. Finally I got MACAUTH working over remote routers. Target clients 
> are smartphones/tablets of employers/students, and guests. Most are MAC 
> based authentication while guests and students will get limited vouchers. 
>
> I did segmentation in Grase/Chili IP range as per your advice, so every 
> DD-WRT router supply clients in different range: 10.1.1.0/24; 10.1.2.0/24, 
> 10.1.3.0/24 ...and so on. 
>
> Whole idea is to cover wider area  inside same site (Eg. school, single 
> site factory/company) using existing LAN infrastructure. So all APs are set 
> to the same SSID. Some of WiFi signals are overlapping each other 
> (different channels are applied. I mean on pure radio signal intensity 
> overlap). I assume that roaming will happen automatically. 
>
> Well, seems that roaming does not happen smoothly because when changing AP 
> connection client will not get new IP so it will not connect to closer AP, 
> while previous got IP remains.  If fully radio disconnection occur, next 
> connection attempt will succeed (client will get new IP )
>
> When more APs connected to same Chilly (as originally is to grase LAN 
> side) roaming goes smoothly because no IP changes needed. 
>
> Do you have any experience with this, or advice how to solve this?
>
> My set up is based on TP link WR 842ND ver.2 and firmware: DD-WRT v24-sp2 
> (04/09/15) for this router.
>
> Rgds.
>
>
> *Drazen *
> 8.12.2014. u 13:15, Norberto Esteves je napisao/la:
>
> Hi Bob, 
>
> dhcpend is correct since it is a count starting from first IP (10.1.0.0) 
> which means dhcpend 299 is the IP 10.1.1.43. An easier way to calculate 
> this would be to have each entire subnet assigned to each site:
>
> Site 1 (Master): dhcpstart 2 dhcpend 254 (range 10.1.0.1 -> 10.1.0.254)
> Site 2 (Slave): dhcpstart 257 dhcpend 510 (range 10.1.1.1 -> 10.1.1.254)
> Site 3 (Slave): dhcpstart 513 dhcpend 766 (range 10.1.2.1 -> 10.1.2.254)
> Site 4 (Slave): dhcpstart 769 dhcpend 1022 (range 10.1.3.1 -> 10.1.3.254)
> ....
>
> The rule is: Next Site will start 3 hosts away from last one and end 253 
> hosts away from start
> This way Chillispot IP is always 10.1.0.1 and  we can easily identify 
> which sites the clients belong to.
>
> Before coming up with this solution I used a different method assigning 
> different networks to each site (Master = 10.1.0.0/24, Slave 1 = 
> 10.1.1.0/24 ....) this means each Chillispot would have a different IP 
> which means it is harder to do because involves more modifications to 
> original code and I don't think it worth it.
>
> Next thing to do in order to solve Development Issue #56 is to add a new 
> menu in Grase admin to manage and customise the remote sites and modify 
> portal page to identify and adapt to each site, including different logos, 
> Names, etc... also ticket printing could be adapted to reflect each site 
> information.
>
> Regarding to DD-WRT Routers, I use for testing D-Link Dir-615 (hardware 
> version H2) And Netgear WNDR3700 V4 for the remote sites.
> WNDR3700 can support hundreds of concurrent users.
>
> Regards,
>
> Norberto 
>  
>   
>
>
>
>
>
> Segunda-feira, 8 de Dezembro de 2014 0:58:40 UTC, bob.hunt.52 escreveu: 
>>
>> Hi Norberto,
>>
>> Thanks so much for your efforts. This looks like it might solve 
>> Development Issue #56 
>> <https://github.com/GraseHotspot/grase-www-portal/issues/56>
>> https://github.com/GraseHotspot/grase-www-portal/issues/56 
>> <https://github.com/GraseHotspot/grase-www-portal/issues/56>
>>
>> One issue I noticed with your tutorial...
>> Shouldn't "dhcpend 299" really read  "dhcpend 255"? 
>>
>> Also I think that standard openwrt based CoovaAP firmware ( 
>> http://coova.org/CoovaAP ) should work out of the box as client access 
>> controller.
>>
>> Cheers,
>>
>> Bob
>>
>> On Mon, Dec 8, 2014 at 7:25 AM, Norberto Esteves <no***.@gmail.com> 
>> wrote:
>>
>>> Other thing that was missing, 
>>>
>>> If you want to use computer accounts you need to add the option 
>>> "macauth" to Advanced Chilispot Options:
>>>
>>> defidletimeout 600
>>> interval 600
>>> macauth
>>> macpasswd password
>>> nousergardendata
>>> uamlogoutip 1.0.0.0
>>> coaport 3779
>>> dhcpstart 200
>>> dhcpend 299
>>>
>>> Regards,
>>>
>>> Norberto
>>>
>>>
>>> Domingo, 7 de Dezembro de 2014 10:14:38 UTC, Norberto Esteves escreveu: 
>>>
>>>> Hi Drazen, 
>>>>
>>>> Router is connected at WAN side, all remote sites connect to Grase 
>>>> trough the WAN interface:
>>>>
>>>>   Remote hotspot users <=> DD-WRT <=> Internet <=> Router <=> (WAN) 
>>>> GRASE (LAN) <=>Local hotspot users
>>>>  
>>>> Yes, OpenWRT or other firmware with Coova Chilli built-in should work 
>>>> fine.
>>>>
>>>> Best Regards,
>>>>
>>>> Norberto 
>>>>
>>>> Domingo, 7 de Dezembro de 2014 8:36:03 UTC, drazen.zuvela escreveu: 
>>>>>
>>>>> Hi Norberto 
>>>>> This is great manual, and great solution for schools and companies 
>>>>> local 
>>>>> wifi network. 
>>>>>
>>>>> Still I have some questions: 
>>>>> 1. Which side of grase you have conneted to corporate router or 
>>>>> network? 
>>>>> 2. Assume Openwrt should also work. 
>>>>>
>>>>> Rgds,Drazen 
>>>>>
>>>>>
>>>>>
>>>>>
>>>>> On 12/06/2014 02:59 AM, Norberto Esteves wrote: 
>>>>> > Hi all, 
>>>>> > 
>>>>> > As promised, here is the information you need to setup Grase Hotspot 
>>>>> > on Multiple-locationst (please Tim, feel free to move this to the 
>>>>> wiki 
>>>>> > if you wish). 
>>>>> > 
>>>>> > 
>>>>>
>>>>> -- 
>>> This mailing list is for the Grase Hotspot Project 
>>> http://grasehotspot.org
>>> --- 
>>> You received this message because you are subscribed to the Google 
>>> Groups "Grase Hotspot" group.
>>> To unsubscribe from this group and stop receiving emails from it, send 
>>> an email to gr***.@grasehotspot.org.
>>> To post to this group, send email to gr***.@grasehotspot.org.
>>> Visit this group at 
>>> <http://groups.google.com/a/grasehotspot.org/group/grase-hotspot/>
>>> http://groups.google.com/a/grasehotspot.org/group/grase-hotspot/.
>>> To view this discussion on the web visit 
>>> <https://groups.google.com/a/grasehotspot.org/d/msgid/grase-hotspot/859e967f-5056-4364-a94a-2c8f575e187c%40grasehotspot.org?utm_medium=email&utm_source=footer>
>>> https://groups.google.com/a/
>>> grasehotspot.org/d/msgid/grase-hotspot/859e967f-5056-4364-a94a-2c8f575e187c%40grasehotspot.org.
>>>
>>
>>
>>
>> -- 
>>
>>
>> -- 
> This mailing list is for the Grase Hotspot Project 
> <http://grasehotspot.org>http://grasehotspot.org
> --- 
> You received this message because you are subscribed to the Google Groups 
> "Grase Hotspot" group.
> To unsubscribe from this group and stop receiving emails from it, send an 
> email to gr***.@grasehotspot.org <javascript:>.
> To post to this group, send email to gr***.@grasehotspot.org 
> <javascript:>.
> Visit this group at 
> http://groups.google.com/a/grasehotspot.org/group/grase-hotspot/.
> To view this discussion on the web visit 
> <https://groups.google.com/a/grasehotspot.org/d/msgid/grase-hotspot/094df1a0-59ce-463c-bcc8-0af29812afea%40grasehotspot.org?utm_medium=email&utm_source=footer>
> https://groups.google.com/a/grasehotspot.org/d/msgid/grase-hotspot/094df1a0-59ce-463c-bcc8-0af29812afea%40grasehotspot.org
> .
>
>
>

Thread