2016-09-16 - Re: [GRASE-Hotspot] Ip address configuration

Header Data

From: Erik Andre Aabrekk <er***e@oneway.no>
Message Hash: c666fbad5d193dd66f75ba97ce14971807367f570ab33d6daecf1409ae99e52f
Message ID: <CAJgHx0mGLU+nnLRTnspA7DiG7XMKiWny9gutfPAi921mZdrAzQ@mail.gmail.com>
Reply To: <8070344e-1d8d-4120-a790-77a10651dd64@grasehotspot.org>
UTC Datetime: 2016-09-16 01:25:23 UTC
Raw Date: Fri, 16 Sep 2016 10:25:23 +0200

Raw message 

Hi!

The network interface of eth1 is supposed to be blank (no IP)

So you need to setup the eth1 to not have a ip to get the grase
hotspot portal to work as you expect.

Erik

2016-09-15 7:55 GMT+02.00, Rachitta A Dua <ra***a@gmail.com>:
> Hi
>
> I have installed grase on a Raspberry Pi. The moment I installed it, it
> worked fine. Even worked properly after an immediate reboot. However, when
> I started the device the following day, it wasn't working. The issue is
> that I cannot connect to the access point. If i try to connect my mobile to
>
> the access point, it just shows connecting but never connects.
>
>
> This is the result of ifconfig
>
> eth0      Link encap:Ethernet  HWaddr b8:27:eb:38:08:33
>           inet addr:192.168.1.8  Bcast:192.168.1.255  Mask:255.255.255.0
>           inet6 addr: fe80::a362:20f7:2ad9:ced1/64 Scope:Link
>           UP BROADCAST RUNNING MULTICAST  MTU:1500  Metric:1
>           RX packets:917 errors:0 dropped:0 overruns:0 frame:0
>           TX packets:519 errors:0 dropped:0 overruns:0 carrier:0
>           collisions:0 txqueuelen:1000
>           RX bytes:82599 (80.6 KiB)  TX bytes:86937 (84.8 KiB)
>
> eth1      Link encap:Ethernet  HWaddr 00:e0:4c:53:44:58
>           inet addr:169.254.161.241  Bcast:169.254.255.255
> Mask:255.255.0.0
>           inet6 addr: fe80::26a5:b629:f948:92c3/64 Scope:Link
>           UP BROADCAST RUNNING MULTICAST  MTU:1500  Metric:1
>           RX packets:11 errors:2 dropped:1 overruns:0 frame:0
>           TX packets:78 errors:0 dropped:0 overruns:0 carrier:0
>           collisions:0 txqueuelen:1000
>           RX bytes:3350 (3.2 KiB)  TX bytes:16024 (15.6 KiB)
> lo        Link encap:Local Loopback
>           inet addr:127.0.0.1  Mask:255.0.0.0
>           inet6 addr: ::1/128 Scope:Host
>           UP LOOPBACK RUNNING  MTU:65536  Metric:1
>           RX packets:196 errors:0 dropped:0 overruns:0 frame:0
>           TX packets:196 errors:0 dropped:0 overruns:0 carrier:0
>           collisions:0 txqueuelen:1
>           RX bytes:25419 (24.8 KiB)  TX bytes:25419 (24.8 KiB)
>
> tun0      Link encap:UNSPEC  HWaddr
> 00-00-00-00-00-00-00-00-00-00-00-00-00-00-00
> -00
>           inet addr:10.1.0.1  P-t-P:10.1.0.1  Mask:255.255.255.0
>           UP POINTOPOINT RUNNING  MTU:1500  Metric:1
>           RX packets:0 errors:0 dropped:0 overruns:0 frame:0
>           TX packets:0 errors:0 dropped:0 overruns:0 carrier:0
>           collisions:0 txqueuelen:100
>           RX bytes:0 (0.0 B)  TX bytes:0 (0.0 B)
>
> wlan0     Link encap:Ethernet  HWaddr b8:27:eb:6d:5d:66
>           UP BROADCAST PROMISC  MTU:1500  Metric:1
>           RX packets:1 errors:0 dropped:1 overruns:0 frame:0
>           TX packets:0 errors:0 dropped:0 overruns:0 carrier:0
>           collisions:0 txqueuelen:1000
>           RX bytes:60 (60.0 B)  TX bytes:0 (0.0 B)
>
> I believe it's the ip address of eth1 that is creating the issue. Please
> help me out.
>
> --
> This mailing list is for the Grase Hotspot Project http://grasehotspot.org
> ---
> You received this message because you are subscribed to the Google Groups
> "Grase Hotspot" group.
> To unsubscribe from this group and stop receiving emails from it, send an
> email to gr***e@grasehotspot.org.
> To post to this group, send email to gr***t@grasehotspot.org.
> Visit this group at
> https://groups.google.com/a/grasehotspot.org/group/grase-hotspot/.
> To view this discussion on the web visit
> https://groups.google.com/a/grasehotspot.org/d/msgid/grase-hotspot/8070344e-1d8d-4120-a790-77a10651dd64%40grasehotspot.org.
>

Thread