2016-09-16 - Re: [GRASE-Hotspot] Ip address configuration

Header Data

From: Dražen Žuvela <dr***a@radez.hr>
Message Hash: ebb0bfd112ed5f3cf8377caa8e7134b20f67706c2d5089f2fcb6afec2a1d3084
Message ID: <d167ef47-3445-d508-2166-bcf3545e9f07@radez.hr>
Reply To: <29cb8a8e-094f-4455-b55c-d2962f046e86@grasehotspot.org>
UTC Datetime: 2016-09-16 02:04:21 UTC
Raw Date: Fri, 16 Sep 2016 11:04:21 +0200

Raw message 

I agree with Erik,
but i prefer to let grase-setup did the work as per design. In order to 
achieve that you need to have board with 2 network interfaces.
Seems that rPi board has *3 physical interfaces*: eth0, eth1 and wlan0 !!!

eth0 and wlan0 both start with mac B8:27:EB which belonging to Raspberry 
Pi Foundation ,
and eth1 starts with 00:e0:4c which is REALTEK (probably your usb-to-eth 
adapter) .
You should read your raspbery documentation carefully and see where that 
wlan0 comes from. Maybe you need to disable that in bios, or you may 
need not your realtek adapter at all.

Drazen

16.9.2016. u 10:43, Rachitta A Dua je napisao/la:
> Hi Erik
>
> Thanks for your response.
>
> Could you please guide me as to how can I do that? I tried editing 
> /etc/network/interfaces by adding the line iface eth1 inet manual but 
> that didn't work either.
>
> On Friday, September 16, 2016 at 1:55:26 PM UTC+5:30, erikandre wrote:
>
>     Hi!
>
>     The network interface of eth1 is supposed to be blank (no IP)
>
>     So you need to setup the eth1 to not have a ip to get the grase
>     hotspot portal to work as you expect.
>
>     Erik
>
>     2016-09-15 7:55 GMT+02.00, Rachitta A Dua <ra***.@gmail.com
>     <javascript:>>:
>     > Hi
>     >
>     > I have installed grase on a Raspberry Pi. The moment I installed
>     it, it
>     > worked fine. Even worked properly after an immediate reboot.
>     However, when
>     > I started the device the following day, it wasn't working. The
>     issue is
>     > that I cannot connect to the access point. If i try to connect
>     my mobile to
>     >
>     > the access point, it just shows connecting but never connects.
>     >
>     >
>     > This is the result of ifconfig
>     >
>     > eth0      Link encap:Ethernet  HWaddr b8:27:eb:38:08:33
>     >           inet addr:192.168.1.8  Bcast:192.168.1.255
>      Mask:255.255.255.0
>     >           inet6 addr: fe80::a362:20f7:2ad9:ced1/64 Scope:Link
>     >           UP BROADCAST RUNNING MULTICAST  MTU:1500  Metric:1
>     >           RX packets:917 errors:0 dropped:0 overruns:0 frame:0
>     >           TX packets:519 errors:0 dropped:0 overruns:0 carrier:0
>     >           collisions:0 txqueuelen:1000
>     >           RX bytes:82599 (80.6 KiB)  TX bytes:86937 (84.8 KiB)
>     >
>     > eth1      Link encap:Ethernet  HWaddr 00:e0:4c:53:44:58
>     >           inet addr:169.254.161.241  Bcast:169.254.255.255
>     > Mask:255.255.0.0
>     >           inet6 addr: fe80::26a5:b629:f948:92c3/64 Scope:Link
>     >           UP BROADCAST RUNNING MULTICAST  MTU:1500  Metric:1
>     >           RX packets:11 errors:2 dropped:1 overruns:0 frame:0
>     >           TX packets:78 errors:0 dropped:0 overruns:0 carrier:0
>     >           collisions:0 txqueuelen:1000
>     >           RX bytes:3350 (3.2 KiB)  TX bytes:16024 (15.6 KiB)
>     > lo        Link encap:Local Loopback
>     >           inet addr:127.0.0.1  Mask:255.0.0.0
>     >           inet6 addr: ::1/128 Scope:Host
>     >           UP LOOPBACK RUNNING  MTU:65536  Metric:1
>     >           RX packets:196 errors:0 dropped:0 overruns:0 frame:0
>     >           TX packets:196 errors:0 dropped:0 overruns:0 carrier:0
>     >           collisions:0 txqueuelen:1
>     >           RX bytes:25419 (24.8 KiB)  TX bytes:25419 (24.8 KiB)
>     >
>     > tun0      Link encap:UNSPEC  HWaddr
>     > 00-00-00-00-00-00-00-00-00-00-00-00-00-00-00
>     > -00
>     >           inet addr:10.1.0.1  P-t-P:10.1.0.1  Mask:255.255.255.0
>     >           UP POINTOPOINT RUNNING  MTU:1500  Metric:1
>     >           RX packets:0 errors:0 dropped:0 overruns:0 frame:0
>     >           TX packets:0 errors:0 dropped:0 overruns:0 carrier:0
>     >           collisions:0 txqueuelen:100
>     >           RX bytes:0 (0.0 B)  TX bytes:0 (0.0 B)
>     >
>     > wlan0     Link encap:Ethernet  HWaddr b8:27:eb:6d:5d:66
>     >           UP BROADCAST PROMISC  MTU:1500  Metric:1
>     >           RX packets:1 errors:0 dropped:1 overruns:0 frame:0
>     >           TX packets:0 errors:0 dropped:0 overruns:0 carrier:0
>     >           collisions:0 txqueuelen:1000
>     >           RX bytes:60 (60.0 B)  TX bytes:0 (0.0 B)
>     >
>     > I believe it's the ip address of eth1 that is creating the
>     issue. Please
>     > help me out.
>     >
>     > --
>     > This mailing list is for the Grase Hotspot Project
>     http://grasehotspot.org
>     > ---
>     > You received this message because you are subscribed to the
>     Google Groups
>     > "Grase Hotspot" group.
>     > To unsubscribe from this group and stop receiving emails from
>     it, send an
>     > email to gr***.@grasehotspot.org <javascript:>.
>     > To post to this group, send email to gr***.@grasehotspot.org
>     <javascript:>.
>     > Visit this group at
>     >
>     https://groups.google.com/a/grasehotspot.org/group/grase-hotspot/
>     <https://groups.google.com/a/grasehotspot.org/group/grase-hotspot/>.
>     > To view this discussion on the web visit
>     >
>     https://groups.google.com/a/grasehotspot.org/d/msgid/grase-hotspot/8070344e-1d8d-4120-a790-77a10651dd64%40grasehotspot.org
>     <https://groups.google.com/a/grasehotspot.org/d/msgid/grase-hotspot/8070344e-1d8d-4120-a790-77a10651dd64%40grasehotspot.org>.
>
>     >
>
> -- 
> This mailing list is for the Grase Hotspot Project http://grasehotspot.org
> ---
> You received this message because you are subscribed to the Google 
> Groups "Grase Hotspot" group.
> To unsubscribe from this group and stop receiving emails from it, send 
> an email to gr***e@grasehotspot.org 
> <mailto:gr***e@grasehotspot.org>.
> To post to this group, send email to gr***t@grasehotspot.org 
> <mailto:gr***t@grasehotspot.org>.
> Visit this group at 
> https://groups.google.com/a/grasehotspot.org/group/grase-hotspot/.
> To view this discussion on the web visit 
> https://groups.google.com/a/grasehotspot.org/d/msgid/grase-hotspot/29cb8a8e-094f-4455-b55c-d2962f046e86%40grasehotspot.org 
> <https://groups.google.com/a/grasehotspot.org/d/msgid/grase-hotspot/29cb8a8e-094f-4455-b55c-d2962f046e86%40grasehotspot.org?utm_medium=email&utm_source=footer>.

Thread