2016-09-15 - Re: [GRASE-Hotspot] Ip address configuration

Header Data

From: emre erdoğan <po***e@gmail.com>
Message Hash: f7bfc1f054cfc4e3154d0a85bd2859c29b3ef3ad065e6beadbfbcfef9e7f0724
Message ID: <CADDedMFN7t–LrFGhNTaztV4Z1gr7m0KZQ0sb5g60hSMJzUb-w@mail.gmail.com>
Reply To: <8070344e-1d8d-4120-a790-77a10651dd64@grasehotspot.org>
UTC Datetime: 2016-09-15 03:01:32 UTC
Raw Date: Thu, 15 Sep 2016 13:01:32 +0300

Raw message 

Hi.

I also tried to setup grase on Raspberry Pi 2 and 3. Now it works like a
charm.

Internal nic should be eth0 and USB nic should be eth1. These settings must
be checked after the setup , because wifi adaptor also tries to be eth1.
Radmin can configure it at the network settings page.

Many times i faced the same problem like you. At the end, my solution was
to install raspbian with graphical interface. Network manager is helping us
to maintain the settings for the network adaptors, however server edition
is changing the usb bus and devices's addresses after reboot and interface
setups are changing.

You may want to try https://downloads.raspberrypi.org/raspbian_latest

Happy days for everyone and thanks Tim for everyting :)

Emre Erdogan


2016-09-15 8:55 GMT+03:00 Rachitta A Dua <ra***a@gmail.com>:

> Hi
>
> I have installed grase on a Raspberry Pi. The moment I installed it, it
> worked fine. Even worked properly after an immediate reboot. However, when
> I started the device the following day, it wasn't working. The issue is
> that I cannot connect to the access point. If i try to connect my mobile to
> the access point, it just shows connecting but never connects.
>
>
> This is the result of ifconfig
>
> eth0      Link encap:Ethernet  HWaddr b8:27:eb:38:08:33
>           inet addr:192.168.1.8  Bcast:192.168.1.255  Mask:255.255.255.0
>           inet6 addr: fe80::a362:20f7:2ad9:ced1/64 Scope:Link
>           UP BROADCAST RUNNING MULTICAST  MTU:1500  Metric:1
>           RX packets:917 errors:0 dropped:0 overruns:0 frame:0
>           TX packets:519 errors:0 dropped:0 overruns:0 carrier:0
>           collisions:0 txqueuelen:1000
>           RX bytes:82599 (80.6 KiB)  TX bytes:86937 (84.8 KiB)
>
> eth1      Link encap:Ethernet  HWaddr 00:e0:4c:53:44:58
>           inet addr:169.254.161.241  Bcast:169.254.255.255
>  Mask:255.255.0.0
>           inet6 addr: fe80::26a5:b629:f948:92c3/64 Scope:Link
>           UP BROADCAST RUNNING MULTICAST  MTU:1500  Metric:1
>           RX packets:11 errors:2 dropped:1 overruns:0 frame:0
>           TX packets:78 errors:0 dropped:0 overruns:0 carrier:0
>           collisions:0 txqueuelen:1000
>           RX bytes:3350 (3.2 KiB)  TX bytes:16024 (15.6 KiB)
> lo        Link encap:Local Loopback
>           inet addr:127.0.0.1  Mask:255.0.0.0
>           inet6 addr: ::1/128 Scope:Host
>           UP LOOPBACK RUNNING  MTU:65536  Metric:1
>           RX packets:196 errors:0 dropped:0 overruns:0 frame:0
>           TX packets:196 errors:0 dropped:0 overruns:0 carrier:0
>           collisions:0 txqueuelen:1
>           RX bytes:25419 (24.8 KiB)  TX bytes:25419 (24.8 KiB)
>
> tun0      Link encap:UNSPEC  HWaddr 00-00-00-00-00-00-00-00-00-00-
> 00-00-00-00-00
> -00
>           inet addr:10.1.0.1  P-t-P:10.1.0.1  Mask:255.255.255.0
>           UP POINTOPOINT RUNNING  MTU:1500  Metric:1
>           RX packets:0 errors:0 dropped:0 overruns:0 frame:0
>           TX packets:0 errors:0 dropped:0 overruns:0 carrier:0
>           collisions:0 txqueuelen:100
>           RX bytes:0 (0.0 B)  TX bytes:0 (0.0 B)
>
> wlan0     Link encap:Ethernet  HWaddr b8:27:eb:6d:5d:66
>           UP BROADCAST PROMISC  MTU:1500  Metric:1
>           RX packets:1 errors:0 dropped:1 overruns:0 frame:0
>           TX packets:0 errors:0 dropped:0 overruns:0 carrier:0
>           collisions:0 txqueuelen:1000
>           RX bytes:60 (60.0 B)  TX bytes:0 (0.0 B)
>
> I believe it's the ip address of eth1 that is creating the issue. Please
> help me out.
>
> --
> This mailing list is for the Grase Hotspot Project http://grasehotspot.org
> ---
> You received this message because you are subscribed to the Google Groups
> "Grase Hotspot" group.
> To unsubscribe from this group and stop receiving emails from it, send an
> email to gr***e@grasehotspot.org.
> To post to this group, send email to gr***t@grasehotspot.org.
> Visit this group at https://groups.google.com/a/
> grasehotspot.org/group/grase-hotspot/.
> To view this discussion on the web visit https://groups.google.com/a/
> grasehotspot.org/d/msgid/grase-hotspot/8070344e-1d8d-
> 4120-a790-77a10651dd64%40grasehotspot.org
> <https://groups.google.com/a/grasehotspot.org/d/msgid/grase-hotspot/8070344e-1d8d-4120-a790-77a10651dd64%40grasehotspot.org?utm_medium=email&utm_source=footer>
> .
>

Thread