2016-09-16 - Re: [GRASE-Hotspot] Ip address configuration

Header Data

From: Dražen Žuvela <dr***a@radez.hr>
Message Hash: a13183cc8b95a387bfb757242661c851ecef3011f97031e530ead2bafba696b2
Message ID: <2dbe25f4-8b1d-10fd-5cd1-b9f947c855f7@radez.hr>
Reply To: <CAJgHx0=uoMRT2PtDZqZZTX+naKpj4K8XvC65Hc+A9NwFGtjkeA@mail.gmail.com>
UTC Datetime: 2016-09-16 04:09:22 UTC
Raw Date: Fri, 16 Sep 2016 13:09:22 +0200

Raw message 

So, that is the answer.
Only two adapters should be present before starting linux installation 
and all should work fine.

Drazen

16.9.2016. u 12:24, Erik Andre Aabrekk je napisao/la:
> Hi!
>
> Raspberry got 1 wireless and 1 ethernet.
>
> So if you use Wireless to connect to Inet (WAN) and ethernet to
> connect with devices. It should work just like a dream.
>
> What Image is been used to install ubuntu on raspberry 3?
>
>
>
> 2016-09-16 11:04 GMT+02.00, Dra\u017een \u017duvela <dr***a@radez.hr>:
>> I agree with Erik,
>> but i prefer to let grase-setup did the work as per design. In order to
>> achieve that you need to have board with 2 network interfaces.
>> Seems that rPi board has *3 physical interfaces*: eth0, eth1 and wlan0 !!!
>>
>> eth0 and wlan0 both start with mac B8:27:EB which belonging to Raspberry
>> Pi Foundation ,
>> and eth1 starts with 00:e0:4c which is REALTEK (probably your usb-to-eth
>> adapter) .
>> You should read your raspbery documentation carefully and see where that
>> wlan0 comes from. Maybe you need to disable that in bios, or you may
>> need not your realtek adapter at all.
>>
>> Drazen
>>
>> 16.9.2016. u 10:43, Rachitta A Dua je napisao/la:
>>> Hi Erik
>>>
>>> Thanks for your response.
>>>
>>> Could you please guide me as to how can I do that? I tried editing
>>> /etc/network/interfaces by adding the line iface eth1 inet manual but
>>> that didn't work either.
>>>
>>> On Friday, September 16, 2016 at 1:55:26 PM UTC+5:30, erikandre wrote:
>>>
>>>      Hi!
>>>
>>>      The network interface of eth1 is supposed to be blank (no IP)
>>>
>>>      So you need to setup the eth1 to not have a ip to get the grase
>>>      hotspot portal to work as you expect.
>>>
>>>      Erik
>>>
>>>      2016-09-15 7:55 GMT+02.00, Rachitta A Dua <ra***.@gmail.com
>>>      <javascript:>>:
>>>      > Hi
>>>      >
>>>      > I have installed grase on a Raspberry Pi. The moment I installed
>>>      it, it
>>>      > worked fine. Even worked properly after an immediate reboot.
>>>      However, when
>>>      > I started the device the following day, it wasn't working. The
>>>      issue is
>>>      > that I cannot connect to the access point. If i try to connect
>>>      my mobile to
>>>      >
>>>      > the access point, it just shows connecting but never connects.
>>>      >
>>>      >
>>>      > This is the result of ifconfig
>>>      >
>>>      > eth0      Link encap:Ethernet  HWaddr b8:27:eb:38:08:33
>>>      >           inet addr:192.168.1.8  Bcast:192.168.1.255
>>>       Mask:255.255.255.0
>>>      >           inet6 addr: fe80::a362:20f7:2ad9:ced1/64 Scope:Link
>>>      >           UP BROADCAST RUNNING MULTICAST  MTU:1500  Metric:1
>>>      >           RX packets:917 errors:0 dropped:0 overruns:0 frame:0
>>>      >           TX packets:519 errors:0 dropped:0 overruns:0 carrier:0
>>>      >           collisions:0 txqueuelen:1000
>>>      >           RX bytes:82599 (80.6 KiB)  TX bytes:86937 (84.8 KiB)
>>>      >
>>>      > eth1      Link encap:Ethernet  HWaddr 00:e0:4c:53:44:58
>>>      >           inet addr:169.254.161.241  Bcast:169.254.255.255
>>>      > Mask:255.255.0.0
>>>      >           inet6 addr: fe80::26a5:b629:f948:92c3/64 Scope:Link
>>>      >           UP BROADCAST RUNNING MULTICAST  MTU:1500  Metric:1
>>>      >           RX packets:11 errors:2 dropped:1 overruns:0 frame:0
>>>      >           TX packets:78 errors:0 dropped:0 overruns:0 carrier:0
>>>      >           collisions:0 txqueuelen:1000
>>>      >           RX bytes:3350 (3.2 KiB)  TX bytes:16024 (15.6 KiB)
>>>      > lo        Link encap:Local Loopback
>>>      >           inet addr:127.0.0.1  Mask:255.0.0.0
>>>      >           inet6 addr: ::1/128 Scope:Host
>>>      >           UP LOOPBACK RUNNING  MTU:65536  Metric:1
>>>      >           RX packets:196 errors:0 dropped:0 overruns:0 frame:0
>>>      >           TX packets:196 errors:0 dropped:0 overruns:0 carrier:0
>>>      >           collisions:0 txqueuelen:1
>>>      >           RX bytes:25419 (24.8 KiB)  TX bytes:25419 (24.8 KiB)
>>>      >
>>>      > tun0      Link encap:UNSPEC  HWaddr
>>>      > 00-00-00-00-00-00-00-00-00-00-00-00-00-00-00
>>>      > -00
>>>      >           inet addr:10.1.0.1  P-t-P:10.1.0.1  Mask:255.255.255.0
>>>      >           UP POINTOPOINT RUNNING  MTU:1500  Metric:1
>>>      >           RX packets:0 errors:0 dropped:0 overruns:0 frame:0
>>>      >           TX packets:0 errors:0 dropped:0 overruns:0 carrier:0
>>>      >           collisions:0 txqueuelen:100
>>>      >           RX bytes:0 (0.0 B)  TX bytes:0 (0.0 B)
>>>      >
>>>      > wlan0     Link encap:Ethernet  HWaddr b8:27:eb:6d:5d:66
>>>      >           UP BROADCAST PROMISC  MTU:1500  Metric:1
>>>      >           RX packets:1 errors:0 dropped:1 overruns:0 frame:0
>>>      >           TX packets:0 errors:0 dropped:0 overruns:0 carrier:0
>>>      >           collisions:0 txqueuelen:1000
>>>      >           RX bytes:60 (60.0 B)  TX bytes:0 (0.0 B)
>>>      >
>>>      > I believe it's the ip address of eth1 that is creating the
>>>      issue. Please
>>>      > help me out.
>>>      >
>>>      > --
>>>      > This mailing list is for the Grase Hotspot Project
>>>      http://grasehotspot.org
>>>      > ---
>>>      > You received this message because you are subscribed to the
>>>      Google Groups
>>>      > "Grase Hotspot" group.
>>>      > To unsubscribe from this group and stop receiving emails from
>>>      it, send an
>>>      > email to gr***.@grasehotspot.org <javascript:>.
>>>      > To post to this group, send email to gr***.@grasehotspot.org
>>>      <javascript:>.
>>>      > Visit this group at
>>>      >
>>>      https://groups.google.com/a/grasehotspot.org/group/grase-hotspot/
>>>      <https://groups.google.com/a/grasehotspot.org/group/grase-hotspot/>.
>>>      > To view this discussion on the web visit
>>>      >
>>>
>>> https://groups.google.com/a/grasehotspot.org/d/msgid/grase-hotspot/8070344e-1d8d-4120-a790-77a10651dd64%40grasehotspot.org
>>>
>>> <https://groups.google.com/a/grasehotspot.org/d/msgid/grase-hotspot/8070344e-1d8d-4120-a790-77a10651dd64%40grasehotspot.org>.
>>>
>>>      >
>>>
>>> --
>>> This mailing list is for the Grase Hotspot Project
>>> http://grasehotspot.org
>>> ---
>>> You received this message because you are subscribed to the Google
>>> Groups "Grase Hotspot" group.
>>> To unsubscribe from this group and stop receiving emails from it, send
>>> an email to gr***e@grasehotspot.org
>>> <mailto:gr***e@grasehotspot.org>.
>>> To post to this group, send email to gr***t@grasehotspot.org
>>> <mailto:gr***t@grasehotspot.org>.
>>> Visit this group at
>>> https://groups.google.com/a/grasehotspot.org/group/grase-hotspot/.
>>> To view this discussion on the web visit
>>> https://groups.google.com/a/grasehotspot.org/d/msgid/grase-hotspot/29cb8a8e-094f-4455-b55c-d2962f046e86%40grasehotspot.org
>>>
>>> <https://groups.google.com/a/grasehotspot.org/d/msgid/grase-hotspot/29cb8a8e-094f-4455-b55c-d2962f046e86%40grasehotspot.org?utm_medium=email&utm_source=footer>.
>> --
>> This mailing list is for the Grase Hotspot Project http://grasehotspot.org
>> ---
>> You received this message because you are subscribed to the Google Groups
>> "Grase Hotspot" group.
>> To unsubscribe from this group and stop receiving emails from it, send an
>> email to gr***e@grasehotspot.org.
>> To post to this group, send email to gr***t@grasehotspot.org.
>> Visit this group at
>> https://groups.google.com/a/grasehotspot.org/group/grase-hotspot/.
>> To view this discussion on the web visit
>> https://groups.google.com/a/grasehotspot.org/d/msgid/grase-hotspot/d167ef47-3445-d508-2166-bcf3545e9f07%40radez.hr.
>>

Thread