2015-11-25 - Re: [GRASE-Hotspot] Access Point Configuration

Header Data

From: drazen <dr***a@radez.hr>
Message Hash: 5475ffd577a9d3a2f5879d74ffd5860d04fe3949e1752af4f1e39e70d1b9afb6
Message ID: <56561B47.1030007@radez.hr>
Reply To: <412f7252-410e-44ac-9a18-fd5373c364b1@grasehotspot.org>
UTC Datetime: 2015-11-25 13:34:15 UTC
Raw Date: Wed, 25 Nov 2015 21:34:15 +0100

Raw message 

Adjustment at Wifi radio device:
1. Wireless interface working mode "AP"
2. Disable DHCP on device
3. No any encription on interface (no WPA WEP ,) leave it "open"
4. LAN port set to static IP. Say 10.1.0.2 (This is for easy 
administration device in the future)
5. Network mode "Bridge" (This may be optional)

Adjustment at Grase:
6. set DHCPStart to 11 (at least.)
So Grase is at 10.1.0.1 . You will have 10.1.0.2 up to 10.1.0.10 
available for you static devices.

1. to 3. are extremely important.

Drazen



On 11/25/2015 06:04 PM, Gary Wright wrote:
> I just finished successfully loading grasehotspot.  I don't see any recommended configure settings for AP's?  Did I miss that somewhere?
>
> I'm using a Cisco 1130 for my church guest access.
>
> Typical setting would be nice.
>
> Thanks
> Gary
>

Thread