2015-12-10 - Re: [GRASE-Hotspot] Access Point Configuration

Header Data

From: drazen <dr***a@radez.hr>
Message Hash: 7278afe8e14dabdd8f1e630a261d7a0c86a24b818feee32a3bd028cc282d5476
Message ID: <56699D4B.6050402@radez.hr>
Reply To: <206ED70E-AAE2-409A-B071-BF1AD0275F67@gmail.com>
UTC Datetime: 2015-12-10 08:42:03 UTC
Raw Date: Thu, 10 Dec 2015 16:42:03 +0100

Raw message 

Partly correct
Last address from subnet range depends of "netmask" If netmask is 
255.255.255.0 only 255 adress available. So 10.1.0.1 to 10.1.0.255
I suggest you some online IP calculator or android app at play store. 
The are plenty handy ones.


On 12/10/2015 02:19 PM, Gary Wright wrote:
> But the IP needs to be in the 10.1.0. Range correct?  If I start DHCP 
> at 11 then my last octet could be 10,9,8...?
>
> Sent from Gary Wrights iPhone -
> 951-514-1632
>
> On Dec 10, 2015, at 2:09 AM, Timothy White <ti***8@gmail.com 
> <mailto:ti***8@gmail.com>> wrote:
>
>> Hi Gary
>>
>> I'm not familar with this device. However, you will need SSID's on 
>> your radios, otherwise there isn't anything for your clients to 
>> connect to. Then, you probably just need to bridge the Radios to the 
>> Ethernet I think. You also probably don't want your Ethernet to have 
>> an IP in the Grase Hotspot range, as that IP will be given out to 
>> clients unless you adjust your DHCP range.
>>
>> Regards
>>
>> Tim
>>
>> On Thu, Dec 10, 2015 at 2:13 PM, Gary Wright 
>> <wr***g@gmail.com <mailto:wr***g@gmail.com>> wrote:
>>
>>     This is my configuration on my 1130ag access point.  Is this
>>     correct?  Do I need to set an SSID on the ap?  I see neither of
>>     my Radio's have IP's?
>>     interface Dot11Radio0
>>      no ip address
>>      no ip route-cache
>>      shutdown
>>      station-role root
>>      bridge-group 1
>>      bridge-group 1 subscriber-loop-control
>>      bridge-group 1 block-unknown-source
>>      no bridge-group 1 source-learning
>>      no bridge-group 1 unicast-flooding
>>      bridge-group 1 spanning-disabled
>>     !
>>     interface Dot11Radio1
>>      no ip address
>>      no ip route-cache
>>      shutdown
>>      dfs band 3 block
>>      channel dfs
>>      station-role root
>>      bridge-group 1
>>      bridge-group 1 subscriber-loop-control
>>      bridge-group 1 block-unknown-source
>>      no bridge-group 1 source-learning
>>      no bridge-group 1 unicast-flooding
>>      bridge-group 1 spanning-disabled
>>     !
>>     interface FastEthernet0
>>      no ip address
>>      no ip route-cache
>>      duplex auto
>>      speed auto
>>      bridge-group 1
>>      no bridge-group 1 source-learning
>>      bridge-group 1 spanning-disabled
>>     !
>>     interface BVI1
>>      ip address 10.1.0.2 255.255.255.0
>>      no ip route-cache
>>     !
>>     ip default-gateway 10.1.0.1
>>     ip http server
>>     no ip http secure-server
>>     ip http help-path
>>     http://www.cisco.com/warp/public/779/smbiz/prodconfig/help/eag
>>     bridge 1 route ip
>>     !
>>     !
>>     !
>>     line con 0
>>     line vty 0 4
>>      login local
>>     !
>>     end
>>
>>
>>
>>     Gary Wright
>>     951-514-1632 <tel:951-514-1632> Cell
>>     760-730-6603 <tel:760-730-6603> Home
>>     wr***g@gmail.com <mailto:wr***g@gmail.com>
>>
>>
>>     On Wed, Nov 25, 2015 at 12:34 PM, drazen <dr***a@radez.hr
>>     <mailto:dr***a@radez.hr>> wrote:
>>
>>         Adjustment at Wifi radio device:
>>         1. Wireless interface working mode "AP"
>>         2. Disable DHCP on device
>>         3. No any encription on interface (no WPA WEP ,) leave it "open"
>>         4. LAN port set to static IP. Say 10.1.0.2 (This is for easy
>>         administration device in the future)
>>         5. Network mode "Bridge" (This may be optional)
>>
>>         Adjustment at Grase:
>>         6. set DHCPStart to 11 (at least.)
>>         So Grase is at 10.1.0.1 . You will have 10.1.0.2 up to
>>         10.1.0.10 available for you static devices.
>>
>>         1. to 3. are extremely important.
>>
>>         Drazen
>>
>>
>>
>>         On 11/25/2015 06:04 PM, Gary Wright wrote:
>>
>>             I just finished successfully loading grasehotspot.  I
>>             don't see any recommended configure settings for AP's? 
>>             Did I miss that somewhere?
>>
>>             I'm using a Cisco 1130 for my church guest access.
>>
>>             Typical setting would be nice.
>>
>>             Thanks
>>             Gary
>>
>>
>>         -- 
>>         This mailing list is for the Grase Hotspot Project
>>         http://grasehotspot.org
>>         --- You received this message because you are subscribed to
>>         the Google Groups "Grase Hotspot" group.
>>         To unsubscribe from this group and stop receiving emails from
>>         it, send an email to
>>         gr***e@grasehotspot.org
>>         <mailto:grase-hotspot%2B***e@grasehotspot.org>.
>>         To post to this group, send email to
>>         gr***t@grasehotspot.org
>>         <mailto:gr***t@grasehotspot.org>.
>>         Visit this group at
>>         http://groups.google.com/a/grasehotspot.org/group/grase-hotspot/.
>>         To view this discussion on the web visit
>>         https://groups.google.com/a/grasehotspot.org/d/msgid/grase-hotspot/56561B47.1030007%40radez.hr.
>>
>>
>>     -- 
>>     This mailing list is for the Grase Hotspot Project
>>     http://grasehotspot.org
>>     ---
>>     You received this message because you are subscribed to the
>>     Google Groups "Grase Hotspot" group.
>>     To unsubscribe from this group and stop receiving emails from it,
>>     send an email to gr***e@grasehotspot.org
>>     <mailto:gr***e@grasehotspot.org>.
>>     To post to this group, send email to
>>     gr***t@grasehotspot.org
>>     <mailto:gr***t@grasehotspot.org>.
>>     Visit this group at
>>     http://groups.google.com/a/grasehotspot.org/group/grase-hotspot/.
>>     To view this discussion on the web visit
>>     https://groups.google.com/a/grasehotspot.org/d/msgid/grase-hotspot/CAA_X3qfmdoUMRQhZ7DT-A6RVftgdknWkvm97D78ubdDG35UtRA%40mail.gmail.com
>>     <https://groups.google.com/a/grasehotspot.org/d/msgid/grase-hotspot/CAA_X3qfmdoUMRQhZ7DT-A6RVftgdknWkvm97D78ubdDG35UtRA%40mail.gmail.com?utm_medium=email&utm_source=footer>.
>>
>>
>> -- 
>> This mailing list is for the Grase Hotspot Project 
>> http://grasehotspot.org
>> ---
>> You received this message because you are subscribed to the Google 
>> Groups "Grase Hotspot" group.
>> To unsubscribe from this group and stop receiving emails from it, 
>> send an email to gr***e@grasehotspot.org 
>> <mailto:gr***e@grasehotspot.org>.
>> To post to this group, send email to gr***t@grasehotspot.org 
>> <mailto:gr***t@grasehotspot.org>.
>> Visit this group at 
>> http://groups.google.com/a/grasehotspot.org/group/grase-hotspot/.
>> To view this discussion on the web visit 
>> https://groups.google.com/a/grasehotspot.org/d/msgid/grase-hotspot/CAESLx0JH3J6LLQFFDrNwTxwJM8JMB73AO%2ByxAPSSMKHe7ZJzMA%40mail.gmail.com 
>> <https://groups.google.com/a/grasehotspot.org/d/msgid/grase-hotspot/CAESLx0JH3J6LLQFFDrNwTxwJM8JMB73AO%2ByxAPSSMKHe7ZJzMA%40mail.gmail.com?utm_medium=email&utm_source=footer>.
> -- 
> This mailing list is for the Grase Hotspot Project http://grasehotspot.org
> ---
> You received this message because you are subscribed to the Google 
> Groups "Grase Hotspot" group.
> To unsubscribe from this group and stop receiving emails from it, send 
> an email to gr***e@grasehotspot.org 
> <mailto:gr***e@grasehotspot.org>.
> To post to this group, send email to gr***t@grasehotspot.org 
> <mailto:gr***t@grasehotspot.org>.
> Visit this group at 
> http://groups.google.com/a/grasehotspot.org/group/grase-hotspot/.
> To view this discussion on the web visit 
> https://groups.google.com/a/grasehotspot.org/d/msgid/grase-hotspot/206ED70E-AAE2-409A-B071-BF1AD0275F67%40gmail.com 
> <https://groups.google.com/a/grasehotspot.org/d/msgid/grase-hotspot/206ED70E-AAE2-409A-B071-BF1AD0275F67%40gmail.com?utm_medium=email&utm_source=footer>.

Thread