2015-12-10 - Re: [GRASE-Hotspot] Access Point Configuration

Header Data

From: Gary Wright <wr***g@gmail.com>
Message Hash: 1f6985fa305ce97da988351dd1c3db0c5848b9184444b3c1a1af9f2f8d88da9f
Message ID: <206ED70E-AAE2-409A-B071-BF1AD0275F67@gmail.com>
Reply To: <CAESLx0JH3J6LLQFFDrNwTxwJM8JMB73AO+yxAPSSMKHe7ZJzMA@mail.gmail.com>
UTC Datetime: 2015-12-10 06:19:40 UTC
Raw Date: Thu, 10 Dec 2015 05:19:40 -0800

Raw message 

But the IP needs to be in the 10.1.0. Range correct?  If I start DHCP at 11 then my last octet could be 10,9,8...?

Sent from Gary Wrights iPhone - 
951-514-1632

> On Dec 10, 2015, at 2:09 AM, Timothy White <ti***8@gmail.com> wrote:
> 
> Hi Gary
> 
> I'm not familar with this device. However, you will need SSID's on your radios, otherwise there isn't anything for your clients to connect to. Then, you probably just need to bridge the Radios to the Ethernet I think. You also probably don't want your Ethernet to have an IP in the Grase Hotspot range, as that IP will be given out to clients unless you adjust your DHCP range.
> 
> Regards
> 
> Tim
> 
>> On Thu, Dec 10, 2015 at 2:13 PM, Gary Wright <wr***g@gmail.com> wrote:
>> This is my configuration on my 1130ag access point.  Is this correct?  Do I need to set an SSID on the ap?  I see neither of my Radio's have IP's?
>> interface Dot11Radio0
>>  no ip address
>>  no ip route-cache
>>  shutdown
>>  station-role root
>>  bridge-group 1
>>  bridge-group 1 subscriber-loop-control
>>  bridge-group 1 block-unknown-source
>>  no bridge-group 1 source-learning
>>  no bridge-group 1 unicast-flooding
>>  bridge-group 1 spanning-disabled
>> !
>> interface Dot11Radio1
>>  no ip address
>>  no ip route-cache
>>  shutdown
>>  dfs band 3 block
>>  channel dfs
>>  station-role root
>>  bridge-group 1
>>  bridge-group 1 subscriber-loop-control
>>  bridge-group 1 block-unknown-source
>>  no bridge-group 1 source-learning
>>  no bridge-group 1 unicast-flooding
>>  bridge-group 1 spanning-disabled
>> !
>> interface FastEthernet0
>>  no ip address
>>  no ip route-cache
>>  duplex auto
>>  speed auto
>>  bridge-group 1
>>  no bridge-group 1 source-learning
>>  bridge-group 1 spanning-disabled
>> !
>> interface BVI1
>>  ip address 10.1.0.2 255.255.255.0
>>  no ip route-cache
>> !
>> ip default-gateway 10.1.0.1
>> ip http server
>> no ip http secure-server
>> ip http help-path http://www.cisco.com/warp/public/779/smbiz/prodconfig/help/eag
>> bridge 1 route ip
>> !
>> !
>> !
>> line con 0
>> line vty 0 4
>>  login local
>> !
>> end
>> 
>> 
>> 
>> Gary Wright
>> 951-514-1632 Cell
>> 760-730-6603 Home
>> wr***g@gmail.com
>> 
>> 
>>> On Wed, Nov 25, 2015 at 12:34 PM, drazen <dr***a@radez.hr> wrote:
>> 
>>> Adjustment at Wifi radio device:
>>> 1. Wireless interface working mode "AP"
>>> 2. Disable DHCP on device
>>> 3. No any encription on interface (no WPA WEP ,) leave it "open"
>>> 4. LAN port set to static IP. Say 10.1.0.2 (This is for easy administration device in the future)
>>> 5. Network mode "Bridge" (This may be optional)
>>> 
>>> Adjustment at Grase:
>>> 6. set DHCPStart to 11 (at least.)
>>> So Grase is at 10.1.0.1 . You will have 10.1.0.2 up to 10.1.0.10 available for you static devices.
>>> 
>>> 1. to 3. are extremely important.
>>> 
>>> Drazen
>>> 
>>> 
>>> 
>>>> On 11/25/2015 06:04 PM, Gary Wright wrote:
>>>> I just finished successfully loading grasehotspot.  I don't see any recommended configure settings for AP's?  Did I miss that somewhere?
>>>> 
>>>> I'm using a Cisco 1130 for my church guest access.
>>>> 
>>>> Typical setting would be nice.
>>>> 
>>>> Thanks
>>>> Gary
>>> 
>>> -- 
>>> This mailing list is for the Grase Hotspot Project http://grasehotspot.org
>>> --- You received this message because you are subscribed to the Google Groups "Grase Hotspot" group.
>>> To unsubscribe from this group and stop receiving emails from it, send an email to gr***e@grasehotspot.org.
>>> To post to this group, send email to gr***t@grasehotspot.org.
>>> Visit this group at http://groups.google.com/a/grasehotspot.org/group/grase-hotspot/.
>>> To view this discussion on the web visit https://groups.google.com/a/grasehotspot.org/d/msgid/grase-hotspot/56561B47.1030007%40radez.hr.
>> 
>> -- 
>> This mailing list is for the Grase Hotspot Project http://grasehotspot.org
>> --- 
>> You received this message because you are subscribed to the Google Groups "Grase Hotspot" group.
>> To unsubscribe from this group and stop receiving emails from it, send an email to gr***e@grasehotspot.org.
>> To post to this group, send email to gr***t@grasehotspot.org.
>> Visit this group at http://groups.google.com/a/grasehotspot.org/group/grase-hotspot/.
>> To view this discussion on the web visit https://groups.google.com/a/grasehotspot.org/d/msgid/grase-hotspot/CAA_X3qfmdoUMRQhZ7DT-A6RVftgdknWkvm97D78ubdDG35UtRA%40mail.gmail.com.
> 
> -- 
> This mailing list is for the Grase Hotspot Project http://grasehotspot.org
> --- 
> You received this message because you are subscribed to the Google Groups "Grase Hotspot" group.
> To unsubscribe from this group and stop receiving emails from it, send an email to gr***e@grasehotspot.org.
> To post to this group, send email to gr***t@grasehotspot.org.
> Visit this group at http://groups.google.com/a/grasehotspot.org/group/grase-hotspot/.
> To view this discussion on the web visit https://groups.google.com/a/grasehotspot.org/d/msgid/grase-hotspot/CAESLx0JH3J6LLQFFDrNwTxwJM8JMB73AO%2ByxAPSSMKHe7ZJzMA%40mail.gmail.com.

Thread