2015-11-25 - Re: [GRASE-Hotspot] Access Point Configuration

Header Data

From: Gary Wright <wr***g@gmail.com>
Message Hash: 8c298a9184e385448887cd5329feac2e7140cd44781085370a7e39dcfeab76dc
Message ID: <CAA_X3qf6Kn8fa2vTubxhubZnVRKbkkd1rggDWnFr=Go2hiA9kg@mail.gmail.com>
Reply To: <56561B47.1030007@radez.hr>
UTC Datetime: 2015-11-25 14:54:18 UTC
Raw Date: Wed, 25 Nov 2015 13:54:18 -0800

Raw message 

Thank you Drazen.

Gary Wright
951-514-1632 Cell
760-730-6603 Home
wr***g@gmail.com


On Wed, Nov 25, 2015 at 12:34 PM, drazen <dr***a@radez.hr> wrote:

> Adjustment at Wifi radio device:
> 1. Wireless interface working mode "AP"
> 2. Disable DHCP on device
> 3. No any encription on interface (no WPA WEP ,) leave it "open"
> 4. LAN port set to static IP. Say 10.1.0.2 (This is for easy
> administration device in the future)
> 5. Network mode "Bridge" (This may be optional)
>
> Adjustment at Grase:
> 6. set DHCPStart to 11 (at least.)
> So Grase is at 10.1.0.1 . You will have 10.1.0.2 up to 10.1.0.10 available
> for you static devices.
>
> 1. to 3. are extremely important.
>
> Drazen
>
>
>
> On 11/25/2015 06:04 PM, Gary Wright wrote:
>
>> I just finished successfully loading grasehotspot.  I don't see any
>> recommended configure settings for AP's?  Did I miss that somewhere?
>>
>> I'm using a Cisco 1130 for my church guest access.
>>
>> Typical setting would be nice.
>>
>> Thanks
>> Gary
>>
>>
> --
> This mailing list is for the Grase Hotspot Project http://grasehotspot.org
> --- You received this message because you are subscribed to the Google
> Groups "Grase Hotspot" group.
> To unsubscribe from this group and stop receiving emails from it, send an
> email to gr***e@grasehotspot.org.
> To post to this group, send email to gr***t@grasehotspot.org.
> Visit this group at
> http://groups.google.com/a/grasehotspot.org/group/grase-hotspot/.
> To view this discussion on the web visit
> https://groups.google.com/a/grasehotspot.org/d/msgid/grase-hotspot/56561B47.1030007%40radez.hr
> .
>

Thread