2015-12-10 - Re: [GRASE-Hotspot] Access Point Configuration

Header Data

From: Timothy White <ti***8@gmail.com>
Message Hash: d3e72925d0609aa61fe7f3b9fd7d58e07077b267a1be10dea73d119e670785a7
Message ID: <CAESLx0JH3J6LLQFFDrNwTxwJM8JMB73AO+yxAPSSMKHe7ZJzMA@mail.gmail.com>
Reply To: <CAA_X3qfmdoUMRQhZ7DT-A6RVftgdknWkvm97D78ubdDG35UtRA@mail.gmail.com>
UTC Datetime: 2015-12-10 03:09:31 UTC
Raw Date: Thu, 10 Dec 2015 20:09:31 +1000

Raw message 

Hi Gary

I'm not familar with this device. However, you will need SSID's on your
radios, otherwise there isn't anything for your clients to connect to.
Then, you probably just need to bridge the Radios to the Ethernet I think.
You also probably don't want your Ethernet to have an IP in the Grase
Hotspot range, as that IP will be given out to clients unless you adjust
your DHCP range.

Regards

Tim

On Thu, Dec 10, 2015 at 2:13 PM, Gary Wright <wr***g@gmail.com>
wrote:

> This is my configuration on my 1130ag access point.  Is this correct?  Do
> I need to set an SSID on the ap?  I see neither of my Radio's have IP's?
> interface Dot11Radio0
>  no ip address
>  no ip route-cache
>  shutdown
>  station-role root
>  bridge-group 1
>  bridge-group 1 subscriber-loop-control
>  bridge-group 1 block-unknown-source
>  no bridge-group 1 source-learning
>  no bridge-group 1 unicast-flooding
>  bridge-group 1 spanning-disabled
> !
> interface Dot11Radio1
>  no ip address
>  no ip route-cache
>  shutdown
>  dfs band 3 block
>  channel dfs
>  station-role root
>  bridge-group 1
>  bridge-group 1 subscriber-loop-control
>  bridge-group 1 block-unknown-source
>  no bridge-group 1 source-learning
>  no bridge-group 1 unicast-flooding
>  bridge-group 1 spanning-disabled
> !
> interface FastEthernet0
>  no ip address
>  no ip route-cache
>  duplex auto
>  speed auto
>  bridge-group 1
>  no bridge-group 1 source-learning
>  bridge-group 1 spanning-disabled
> !
> interface BVI1
>  ip address 10.1.0.2 255.255.255.0
>  no ip route-cache
> !
> ip default-gateway 10.1.0.1
> ip http server
> no ip http secure-server
> ip http help-path
> http://www.cisco.com/warp/public/779/smbiz/prodconfig/help/eag
> bridge 1 route ip
> !
> !
> !
> line con 0
> line vty 0 4
>  login local
> !
> end
>
>
>
> Gary Wright
> 951-514-1632 Cell
> 760-730-6603 Home
> wr***g@gmail.com
>
>
> On Wed, Nov 25, 2015 at 12:34 PM, drazen <dr***a@radez.hr> wrote:
>
>> Adjustment at Wifi radio device:
>> 1. Wireless interface working mode "AP"
>> 2. Disable DHCP on device
>> 3. No any encription on interface (no WPA WEP ,) leave it "open"
>> 4. LAN port set to static IP. Say 10.1.0.2 (This is for easy
>> administration device in the future)
>> 5. Network mode "Bridge" (This may be optional)
>>
>> Adjustment at Grase:
>> 6. set DHCPStart to 11 (at least.)
>> So Grase is at 10.1.0.1 . You will have 10.1.0.2 up to 10.1.0.10
>> available for you static devices.
>>
>> 1. to 3. are extremely important.
>>
>> Drazen
>>
>>
>>
>> On 11/25/2015 06:04 PM, Gary Wright wrote:
>>
>>> I just finished successfully loading grasehotspot.  I don't see any
>>> recommended configure settings for AP's?  Did I miss that somewhere?
>>>
>>> I'm using a Cisco 1130 for my church guest access.
>>>
>>> Typical setting would be nice.
>>>
>>> Thanks
>>> Gary
>>>
>>>
>> --
>> This mailing list is for the Grase Hotspot Project
>> http://grasehotspot.org
>> --- You received this message because you are subscribed to the Google
>> Groups "Grase Hotspot" group.
>> To unsubscribe from this group and stop receiving emails from it, send an
>> email to gr***e@grasehotspot.org.
>> To post to this group, send email to gr***t@grasehotspot.org.
>> Visit this group at
>> http://groups.google.com/a/grasehotspot.org/group/grase-hotspot/.
>> To view this discussion on the web visit
>> https://groups.google.com/a/grasehotspot.org/d/msgid/grase-hotspot/56561B47.1030007%40radez.hr
>> .
>>
>
> --
> This mailing list is for the Grase Hotspot Project http://grasehotspot.org
> ---
> You received this message because you are subscribed to the Google Groups
> "Grase Hotspot" group.
> To unsubscribe from this group and stop receiving emails from it, send an
> email to gr***e@grasehotspot.org.
> To post to this group, send email to gr***t@grasehotspot.org.
> Visit this group at
> http://groups.google.com/a/grasehotspot.org/group/grase-hotspot/.
> To view this discussion on the web visit
> https://groups.google.com/a/grasehotspot.org/d/msgid/grase-hotspot/CAA_X3qfmdoUMRQhZ7DT-A6RVftgdknWkvm97D78ubdDG35UtRA%40mail.gmail.com
> <https://groups.google.com/a/grasehotspot.org/d/msgid/grase-hotspot/CAA_X3qfmdoUMRQhZ7DT-A6RVftgdknWkvm97D78ubdDG35UtRA%40mail.gmail.com?utm_medium=email&utm_source=footer>
> .
>

Thread