2015-12-09 - Re: [GRASE-Hotspot] Access Point Configuration

Header Data

From: Gary Wright <wr***g@gmail.com>
Message Hash: d5f33db6e4c22a687a4b4bbda39323102d03bd5559102ecb728b9472d5fd7001
Message ID: <CAA_X3qfmdoUMRQhZ7DT-A6RVftgdknWkvm97D78ubdDG35UtRA@mail.gmail.com>
Reply To: <56561B47.1030007@radez.hr>
UTC Datetime: 2015-12-09 21:13:18 UTC
Raw Date: Wed, 09 Dec 2015 20:13:18 -0800

Raw message 

This is my configuration on my 1130ag access point.  Is this correct?  Do I
need to set an SSID on the ap?  I see neither of my Radio's have IP's?
interface Dot11Radio0
 no ip address
 no ip route-cache
 shutdown
 station-role root
 bridge-group 1
 bridge-group 1 subscriber-loop-control
 bridge-group 1 block-unknown-source
 no bridge-group 1 source-learning
 no bridge-group 1 unicast-flooding
 bridge-group 1 spanning-disabled
!
interface Dot11Radio1
 no ip address
 no ip route-cache
 shutdown
 dfs band 3 block
 channel dfs
 station-role root
 bridge-group 1
 bridge-group 1 subscriber-loop-control
 bridge-group 1 block-unknown-source
 no bridge-group 1 source-learning
 no bridge-group 1 unicast-flooding
 bridge-group 1 spanning-disabled
!
interface FastEthernet0
 no ip address
 no ip route-cache
 duplex auto
 speed auto
 bridge-group 1
 no bridge-group 1 source-learning
 bridge-group 1 spanning-disabled
!
interface BVI1
 ip address 10.1.0.2 255.255.255.0
 no ip route-cache
!
ip default-gateway 10.1.0.1
ip http server
no ip http secure-server
ip http help-path
http://www.cisco.com/warp/public/779/smbiz/prodconfig/help/eag
bridge 1 route ip
!
!
!
line con 0
line vty 0 4
 login local
!
end



Gary Wright
951-514-1632 Cell
760-730-6603 Home
wr***g@gmail.com


On Wed, Nov 25, 2015 at 12:34 PM, drazen <dr***a@radez.hr> wrote:

> Adjustment at Wifi radio device:
> 1. Wireless interface working mode "AP"
> 2. Disable DHCP on device
> 3. No any encription on interface (no WPA WEP ,) leave it "open"
> 4. LAN port set to static IP. Say 10.1.0.2 (This is for easy
> administration device in the future)
> 5. Network mode "Bridge" (This may be optional)
>
> Adjustment at Grase:
> 6. set DHCPStart to 11 (at least.)
> So Grase is at 10.1.0.1 . You will have 10.1.0.2 up to 10.1.0.10 available
> for you static devices.
>
> 1. to 3. are extremely important.
>
> Drazen
>
>
>
> On 11/25/2015 06:04 PM, Gary Wright wrote:
>
>> I just finished successfully loading grasehotspot.  I don't see any
>> recommended configure settings for AP's?  Did I miss that somewhere?
>>
>> I'm using a Cisco 1130 for my church guest access.
>>
>> Typical setting would be nice.
>>
>> Thanks
>> Gary
>>
>>
> --
> This mailing list is for the Grase Hotspot Project http://grasehotspot.org
> --- You received this message because you are subscribed to the Google
> Groups "Grase Hotspot" group.
> To unsubscribe from this group and stop receiving emails from it, send an
> email to gr***e@grasehotspot.org.
> To post to this group, send email to gr***t@grasehotspot.org.
> Visit this group at
> http://groups.google.com/a/grasehotspot.org/group/grase-hotspot/.
> To view this discussion on the web visit
> https://groups.google.com/a/grasehotspot.org/d/msgid/grase-hotspot/56561B47.1030007%40radez.hr
> .
>

Thread