2012-04-22 - Re: [GRASE-Hotspot] Vmware hotspot

Header Data

From: Jurica Smolić <ju***c@vilasmolic.co.uk>
Message Hash: 111ddfafb68a782a87f64d5a5570df07e8a03e791fb8f735ac756e346ef6e75e
Message ID: <C4BD202D-6BCC-4A07-8E97-BC3267C36B4C@vilasmolic.co.uk>
Reply To: <99DF9CFBA2E2D947A37658DFB2AE72BB4B49F4A3@G9W0717.americas.hpqcorp.net>
UTC Datetime: 2012-04-22 11:15:32 UTC
Raw Date: Sun, 22 Apr 2012 19:15:32 +0100

Raw message

Thanx for reply glyn...
10.1.0.1 is tun0

What im also having difficulty is setting up the ap to the host lan... Since it does not get dhcp on windows box i set it to 10.1.0.2...

In the ap should my gateway/dns be grase(10.1.0.1) or router gateway?

What do you setup your ap like?

Sent from my iPhone

On 22 Apr 2012, at 17:37, "Pollington, Glyn" <Gl***n@hp.com> wrote:

> Hi Jurica
>  
> It looks like your VM has an address in the wrong subnet unless you have a 16 bit mask or something.  If the host is 192.168.1.x /24 then the bridged vm adaptor should also have the same first three octets.  I have found it very difficult in practice to use the wi-fi adaptor to bridge correctly on my version of VmWare workstation.  I would also set the second adaptor in your vm to be bridged to your other adaptor.  Note that some firewalls and security software make this tricky. On my work laptop I used to be only able to NAT, but since the latest corp mcafee went on I can’t even do that any more.
>  
> Your AP if it is properly set up should get an address like 10.1.0.2 if the hotspot is running. Looking at your info, the 10.1.0.1 address should be bound to tun0 not eth 1 I  think.
>  
> regards
>  
>  
>  
>  
> From: Jurica Smolić [mailto:ju***c@vilasmolic.co.uk] 
> Sent: 21 April 2012 23:08
> To: GRASE Hotspot General Discussions
> Subject: [GRASE-Hotspot] Vmware hotspot
>  
> 
> 
> Hi Tim and anybody that can help.
>  
> The situation is beginning to be desperate now... still no hotspot running.
>  
> I would like to have a VM Ware setup where i have a windows xp/7 host running vmware. host is using wireless to connect to the main router to gain internet access. the physical nic i have used to plugin a dd-wrt router setup to be just an AP (no dhcp etc)
>  
> dd-wrt AP: 192.168.1.1  
> BT internet router (with dhcp enabled): 192.168.1.254 255.255.255.0
> windows host: 192.168.1.64
> ubuntu vm :192.168.232.130 (eth0) and 10.1.0.1 (eth1)
>  
> vmware is setup to use NAT on one NIC and Bridged Mode on another.
> nat (192.168.232.0/255.255.255.0)
> bridged mode( set to use the LAN of the host) 
>  
> when i plugin the dd-wrt ap to the nic on the host machine i do not get an automatic ip address so i set one up (192.168.1.2) (when i do this i loose the internet connectionon host) (surley this should be on dhcp and getting a 10.1.0.x ip address from grase?) if in nic set to dhcp it gets a 169 ip address... 
>  
> i have setup the ubuntu client (VM) with grase and all is well, i can access the radmin page setup users etc. the client also has access to internet. (if i setup a second vm client i can get to the protal asking for login then browse the internet) 
>  
> UBUNTU SETUP 
>  
> interfaces
> auto lo 
> iface lo inet loopback 
> 
> iface eth1 inet manual
>  
> if its easier to setup using virtual box im open to that, i would just like to get this thing going.
> 
>  
> 
> im a windows user guys and linux knowledge is limited.
> 
>  
> 
> thanx in advance JS 
> 
>  
> 
>  
>  
> ------------------------------------------------------------------------------
> For Developers, A Lot Can Happen In A Second.
> Boundary is the first to Know...and Tell You.
> Monitor Your Applications in Ultra-Fine Resolution. Try it FREE!
> http://p.sf.net/sfu/Boundary-d2dvs2
> _______________________________________________
> Grase-hotspot mailing list
> Gr***t@lists.sourceforge.net
> https://lists.sourceforge.net/lists/listinfo/grase-hotspot

Thread