2015-07-22 - Re: [GRASE-Hotspot] Re: static IP traffic on the grase/chilli dhcp pool

Header Data

From: gianluca <au***a@gmail.com>
Message Hash: 285cbe5389c98a518cdc3027fc3be188dfae510bf75524943fa10498884ed252
Message ID: <9415dc4f-39ae-42bd-b6bf-119fd0041c28@grasehotspot.org>
Reply To: <be22ec31-deaa-4fce-bca0-23dfb4e3c9a5@grasehotspot.org>
UTC Datetime: 2015-07-22 12:30:35 UTC
Raw Date: Wed, 22 Jul 2015 12:30:35 -0700

Raw message 

yes, I will try that too this week and report.

I'm not too convinced on the WDS issue because I have a similar setup (no 
grase involved) and works without WDS.
I'm more souspicios about IP range on grase...

the reason is: why I cannot ping my first M5-ap from the grase box?
that antenna has a fixed IP (10.1.0.2, outside of the dhcp range but same 
subnet) it is connected at the same switch,
yet if I ssh on my grase box I can ping 10.1.0.1 (myself) and 10.1.0.10 
(first dhcp pool address) but never 10.1.0.2...

any explanation?? the M5 ethernet port should be reachable from the grase 
linux box(!)

but I will definetely enable WDS on the station....

Il giorno mercoledì 22 luglio 2015 21:26:27 UTC+2, Louis ha scritto:
>
> Attached picture to show Wireless Setup for your NSM5. I had also 
> mentioned this above. Confirm Gianluca? 
> Louis
>
>
>
> On Wednesday, July 22, 2015 at 8:51:44 PM UTC+2, Edward Allen wrote:
>>
>> It's on the wireless tab
>> On Jul 22, 2015 2:51 PM, "Edward Allen" <yb***.@gmail.com> wrote:
>>
>>> Actually I believe it's an easy fix.  Go to the ubnt device that is in 
>>> station mode. I don't have a setup to refer but what you want to do is 
>>> click the check box just below the drop down that allow you to set the 
>>> device mode.  It's should say something about WDS. 
>>> On Jul 22, 2015 2:27 PM, "Louis" <lo***.@gmail.com> wrote:
>>>
>>>> Ok i see how you are setup. Can you look at my setup of one of my 
>>>> Nanos(attached): Compare Network setup of my Access point which connect 
>>>> another NSM2? Confirm you input DNS?
>>>>
>>>>
>>>> On Wednesday, July 22, 2015 at 7:13:31 PM UTC+2, gianluca wrote:
>>>>>
>>>>> mmm ... I don't think I need to turn it off...
>>>>>
>>>>> the wifi link is used only for the wifi link (PtP), but ALL the other 
>>>>> devices on the other side of the wifi link are connected by cable to the 
>>>>> second M5
>>>>>
>>>>> so the traffic is only eth/IP based .. no wifi involved (beside the 
>>>>> PtP link itself)
>>>>>
>>>>> I guess you are using multiple M5 as AP ... where all the devices are 
>>>>> connecting to the M5 and the M5 is connected to grase.
>>>>>
>>>>> I need a PtP link (wifi) to connect to my grase box
>>>>>
>>>>>
>>>>> Il giorno mercoledì 22 luglio 2015 19:07:50 UTC+2, Louis ha scritto:
>>>>>>
>>>>>> Confirm you have turned off AirMax on your NanoStation M5=AP? 
>>>>>> Louis
>>>>>>
>>>>>> On Wednesday, July 22, 2015 at 6:46:57 PM UTC+2, gianluca wrote:
>>>>>>>
>>>>>>>
>>>>>>> ok my setup is very simple:
>>>>>>>
>>>>>>> - Nanostation M5 in wifi AP mode (hidden ssid), connected by cable 
>>>>>>> to the grase box switch. The M5 has networking is bridge with STATIC IP on 
>>>>>>> 10.1.0.2 (gw is the grase box is 10.1.0.1)
>>>>>>> -Nanostation M5 in station mode, networking is bridge with STATIC IP 
>>>>>>> 10.1.0.3 and gw 10.1.0.1
>>>>>>>
>>>>>>> if I connect manually (i.e. connecting the first antenna to my 
>>>>>>> laptop with fixed ip 10.1.0.33) I can ping both antennas and also ALL the 
>>>>>>> devices connected to the M5 station (remote antenna)
>>>>>>>
>>>>>>> if I connect my laptop to the second nanostation (by cable) I can 
>>>>>>> ping the first antenna (so the link works, and my air quality index is 99%, 
>>>>>>> 2ms latency ping)
>>>>>>>
>>>>>>> but if I try to ping 10.1.0.1 (grase box) I cannot even ping!!!
>>>>>>> :-(
>>>>>>>
>>>>>>> ===
>>>>>>> just as a sanity check , what is your setup?? do you fix the 
>>>>>>> antennas IP addresses or do you leave them in dhcp?
>>>>>>>
>>>>>>  -- 
>>>> This mailing list is for the Grase Hotspot Project 
>>>> http://grasehotspot.org
>>>> --- 
>>>> You received this message because you are subscribed to the Google 
>>>> Groups "Grase Hotspot" group.
>>>> To unsubscribe from this group and stop receiving emails from it, send 
>>>> an email to gr***.@grasehotspot.org.
>>>> To post to this group, send email to gr***.@grasehotspot.org.
>>>> Visit this group at 
>>>> http://groups.google.com/a/grasehotspot.org/group/grase-hotspot/.
>>>> To view this discussion on the web visit 
>>>> https://groups.google.com/a/grasehotspot.org/d/msgid/grase-hotspot/83e4aac0-57b2-42aa-864b-7a5739be913f%40grasehotspot.org 
>>>> <https://groups.google.com/a/grasehotspot.org/d/msgid/grase-hotspot/83e4aac0-57b2-42aa-864b-7a5739be913f%40grasehotspot.org?utm_medium=email&utm_source=footer>
>>>> .
>>>>
>>>

Thread