2015-07-22 - Re: static IP traffic on the grase/chilli dhcp pool

Header Data

From: Louis <lo***3@gmail.com>
Message Hash: 85b7e92046164310010504beb26bd306209a6a1339994c7b5a89f86734342940
Message ID: <d0a334b9-889e-4a99-b5c4-fac514807289@grasehotspot.org>
Reply To: <4ab0e088-c5d7-42a7-b1b7-fa9e55f71d94@grasehotspot.org>
UTC Datetime: 2015-07-22 09:30:28 UTC
Raw Date: Wed, 22 Jul 2015 09:30:28 -0700

Raw message 

Hi Gianluca

I have same setup - works flawlessly. Mine links a couple of remote sites. 
May you send more information on your NanoM5 Setup. These must be in Bridge 
and transparent mode. That should work.

Cheers
Louis

On Wednesday, July 22, 2015 at 6:10:35 PM UTC+2, gianluca wrote:
>
> Hi all,
>
> I have a particular setup for my grase box (up and running from almost 2y 
> now).
> today I had to extend the wifi zone to another building and so I used a 
> wifi bridge (ubiquiti Nanostation M5).
>
> the radio link is done using two wifi antenna.
> the antenna do use their private wifi link , while the networking is in 
> bridge mode with a static IP.
>
> my GRASE/chilly dhcp range is 10.1.0.10->10.1.0.250, while the grase box 
> has ip address 10.1.0.1
>
> the antenna have the static IP 10.1.0.2 and 10.1.0.3
>
> the link works great, I can manunally ping with 0ms.
>
> If I connect on the other side of the wifi bridge I do get a VALID ip 
> address from my GRASE box,
> but then I cannot ping 10.1.0.1 ... I cannot connect to the internet at 
> all...
>
> ---
>
> so I suppose chilli is blocking the traffic from IPs outside of the dhcp 
> range,
>
> could someone point me out how to allow some static ip on the network?
> and where is the chilli configuration stored?
>
> thanks
>

Thread