2015-07-22 - Re: static IP traffic on the grase/chilli dhcp pool

Header Data

From: gianluca <au***a@gmail.com>
Message Hash: a551ecb48095ad1f08ce632b8c1c276084dfa0de3150aba7ee8b781668b92efb
Message ID: <4c694044-d975-42d1-881e-a91d4338ecd5@grasehotspot.org>
Reply To: <e0ec5e2d-f164-450c-b36c-3e94cdccc50b@grasehotspot.org>
UTC Datetime: 2015-07-22 10:13:31 UTC
Raw Date: Wed, 22 Jul 2015 10:13:31 -0700

Raw message 

mmm ... I don't think I need to turn it off...

the wifi link is used only for the wifi link (PtP), but ALL the other 
devices on the other side of the wifi link are connected by cable to the 
second M5

so the traffic is only eth/IP based .. no wifi involved (beside the PtP 
link itself)

I guess you are using multiple M5 as AP ... where all the devices are 
connecting to the M5 and the M5 is connected to grase.

I need a PtP link (wifi) to connect to my grase box


Il giorno mercoledì 22 luglio 2015 19:07:50 UTC+2, Louis ha scritto:
>
> Confirm you have turned off AirMax on your NanoStation M5=AP? 
> Louis
>
> On Wednesday, July 22, 2015 at 6:46:57 PM UTC+2, gianluca wrote:
>>
>>
>> ok my setup is very simple:
>>
>> - Nanostation M5 in wifi AP mode (hidden ssid), connected by cable to the 
>> grase box switch. The M5 has networking is bridge with STATIC IP on 
>> 10.1.0.2 (gw is the grase box is 10.1.0.1)
>> -Nanostation M5 in station mode, networking is bridge with STATIC IP 
>> 10.1.0.3 and gw 10.1.0.1
>>
>> if I connect manually (i.e. connecting the first antenna to my laptop 
>> with fixed ip 10.1.0.33) I can ping both antennas and also ALL the devices 
>> connected to the M5 station (remote antenna)
>>
>> if I connect my laptop to the second nanostation (by cable) I can ping 
>> the first antenna (so the link works, and my air quality index is 99%, 2ms 
>> latency ping)
>>
>> but if I try to ping 10.1.0.1 (grase box) I cannot even ping!!!
>> :-(
>>
>> ===
>> just as a sanity check , what is your setup?? do you fix the antennas IP 
>> addresses or do you leave them in dhcp?
>>
>

Thread